Especificaciones API de la Tubería de Perforación (Drill Pipe)

 

La estandarización de la tubería de perforación bajo las normas del Instituto Americano del Petróleo (API) es vital para la seguridad. Las especificaciones se dividen en seis parámetros críticos:

1. Tamaño (OD): Diámetro exterior del cuerpo del tubo (ej. 5", 5 1/2").

2. Peso Nominal: Peso por pie de la tubería incluyendo las conexiones (tool joints).

3. Grado de Acero: Define la resistencia a la fluencia (yield strength). Los grados comunes son E-75 (bajo), X-95, G-105 y S-135 (alta resistencia).

4. Clase de la Tubería: Determina el estado de desgaste tras el uso: New (Nueva), Premium (mínimo 80% de pared remanente), Class 2 y Class 3 (desechable).

5. Rango de Longitud: R1 (18-22 ft), R2 (27-30 ft - el más común), R3 (38-45 ft).

6. Tool Joint (Conexiones): Especifica el tipo de rosca y las dimensiones de la caja y el pin (ej. NC50, 4 1/2 IF).

 

5”	19.5	Grade ”E”	XH	NC50	Premium
tube OD	Nominal Weight	Minimum Yield strength	Upset Tool Joint	Connection thread	Drill Pipe Classification (wear)

Especificaciones API de la Tubería de Perforación (Drill Pipe)

La tubería de perforación es el componente tubular de acero que conecta el equipo de superficie con el ensamblaje de fondo (BHA). Su función es transmitir el torque de rotación y permitir la circulación del fluido de perforación. Para garantizar la seguridad en las operaciones, el Instituto Americano del Petróleo (API) ha establecido estándares estrictos.

1. Parámetros Principales de Clasificación

Para identificar correctamente una tubería de perforación, se deben definir seis parámetros clave:

A. Tamaño (Diámetro Exterior - OD)

Se refiere al diámetro del cuerpo del tubo. Los tamaños más comunes en la industria son:

• 2 3/8", 2 7/8", 3 1/2", 4", 4 1/2", 5", 5 1/2" y 6 5/8".

 

B. Peso Nominal

Es el peso teórico por unidad de longitud (lb/ft) que incluye el cuerpo del tubo y la conexión (tool joint). Es vital para calcular la carga en el gancho (hook load).

 

C. Grado del Acero (API Grade)

Define la resistencia mínima a la fluencia (la fuerza máxima que el acero puede soportar antes de deformarse permanentemente). Los grados estándar son:

• E-75: Resistencia de 75,000 psi. Es el grado más bajo, usado en pozos poco profundos.

• X-95: Resistencia de 95,000 psi.

• G-105: Resistencia de 105,000 psi.

• S-135: Resistencia de 135,000 psi. Es el grado de mayor resistencia para pozos ultra profundos o de alta severidad.

API Drill Pipe Grade	Minimum Yield Strength (psi)	Minimum Tensile Strength (psi)
E-75	75,000	100,000
X-95	95,000	105,000
G-105	105,000	115,000
S-135	135,000	145,000

 

D. Clase de la Tubería (Estado de Desgaste)

Indica la condición física del tubo tras su uso:

• Nueva (New): Sin uso previo.

• Premium: El grosor de la pared es al menos el 80% del grosor original. Es la clase estándar utilizada para la mayoría de las operaciones de perforación.

• Clase 2: El grosor de la pared es al menos el 70% del original.

• Clase 3: Tubería con menos del 70% de pared; generalmente se considera chatarra o solo para usos no críticos.

 

E. Rango de Longitud (API Range)

El API clasifica la longitud de las juntas individuales en tres rangos:

• Rango 1 (R1): 18 - 22 pies (5.5 - 6.7 m).

• Rango 2 (R2): 27 - 30 pies (8.2 - 9.1 m). Es el más utilizado a nivel mundial.

• Rango 3 (R3): 38 - 45 pies (11.6 - 13.7 m). Común en perforación costa afuera (offshore).

  Range	Length, ft
  1	18-22
  2 ( is the most common)	27-30
  3	38-45

   

2. Conexiones (Tool Joints)

El "Tool Joint" es la sección roscada reforzada en los extremos del tubo.

• Pin: El extremo con rosca externa (macho).

• Box (Caja): El extremo con rosca interna (hembra).

• Tipos de rosca comunes: NC (Number Connection), IF (Internal Flush), FH (Full Hole).

   

3. Propiedades Mecánicas Críticas

El artículo enfatiza que un ingeniero de perforación debe monitorear tres límites mecánicos:

1. Capacidad de Tensión: La carga máxima que puede soportar el tubo antes de estirarse o romperse.

2. Resistencia al Colapso: La presión externa máxima que el tubo puede resistir antes de aplastarse (crítico durante pruebas de formación o cementación).

3. Resistencia a la Presión Interna (Burst): La presión interna máxima antes de que el tubo estalle.

4. Capacidad Torsional: El torque máximo que se puede aplicar antes de dañar las conexiones o el cuerpo del tubo.

    

4. Marcado de la Tubería

Según la norma API 5DP, cada junta debe tener una marca estampada en frío en la base del "pin" que indique el tamaño, grado, peso y fabricante para asegurar su trazabilidad.

---

Resumen para el Campo

Cuando solicites tubería de perforación, la descripción técnica correcta sería, por ejemplo:

"5.000" OD, 19.50 lb/ft, Grado S-135, Clase Premium, Rango 2, Conexión NC50.

 

Tabla de Contenidos

• Longitudes
• Tamaño de la tubería de perforación o especificaciones de la OD (Especificaciones)
• Especificaciones de peso nominal de la tubería de perforación (SPECs)
• Las especificaciones de grado de tubería de perforación
• La Junta de Herramientas
• Tipo De Incremento De La Junta De Herramienta
• Clasificación (Desgaste)
• 2 3/8" Especificaciones de la tubería de perforación
• 2 7/8" API Perforación de tuberías Especificaciones
• 3.5" Especificaciones de la tubería de perforación
• 4" Especificaciones de la tubería de perforación
• 4.5" Especificaciones de la API de la tubería de perforación
• 5" Especificaciones de la API de la tubería de perforación
• 5.5" API Perforación de tuberías Especificaciones
• 5 7/8" Especificaciones de tubería de perforación
• 6 5/8" Taladro API Especificaciones
• Tubo De Perforación Combinado De Torsión-Tensión Para Rendir Tubos De Tubería
• Referencias:

Nuevo :	No hay desgaste y nunca se ha utilizado.
Premium :	Desgaste uniforme y un espesor mínimo del 80% del espesor de pared original.
Clase 2:	Permite D/P con un espesor mínimo de pared del 65% con todo el desgaste en un lado siempre que el área de la sección transversal sea la misma que la clase premium, es decir, basada en una reducción de pared no más del 20% uniforme.
Clase 3 :	Permite la tubería de perforación con un espesor de pared mínimo del 55% con todo el desgaste en un lado.

Especificaciones de las especificaciones de la tubería de perforación API (Clasificación de desgaste)

2 3/8′′ Especificaciones de tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Grado y UpsetType	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Internal Pressure	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength2	Tensile Yield Strength3	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D.
2 3/8	6.65	E-75 UE	6.300	138.200	0.280	1.815	1.843	0.867	1.733	15,474	15,599	NC26	3 3/8	1 3/4	6,900	313,700	3,900	1.10	9	10	7.17	3  3/16	1 5/8	0.134	0.110	2 3/8
												HT26	3 3/8	1 3/4	8,700	313,700	5,200	1.38	9	12	7.25	NA	1 5/8	0.134	0.111	2 3/8
												SLH90	3 1/4	1 13/16	6,900	270,200	3,700	1.10	9	10	7.00	3  1/32	1 11/16	0.134	0.107	2 3/8
2 3/8	6.65	X-95 UE	7.900	175.100	0.280	1.815	1.843	0.867	1.733	19,600	19,759	NC26	3 3/8	1 3/4	6,900	313,700	3,900	0.87	9	10	7.17	3  1/4	1 5/8	0.134	0.110	2 3/8
												HT26	3 3/8	1 3/4	8,700	313,700	5,200	1.10	9	12	7.25	NA	1 5/8	0.134	0.111	2 3/8
												SLH90	3 1/4	1 13/16	6,900	270,200	3,700	0.87	9	10	7.00	3  3/32	1 11/16	0.134	0.107	2 3/8
2 3/8	6.65	G-105 UE	8.800	193,500	0.280	1.815	1.843	0.867	1.733	21,663	21,839	NC26	3 3/8	1 3/4	6,900	313,700	3,900	0.78	9	10	7.17	3  9/32	1 5/8	0.134	0.110	2 3/8
												HT26	3 3/8	1 3/4	8,700	313,700	5,200	0.99	9	12	7.25	NA	1 5/8	0.134	0.111	2 3/8
												SLH90	3 1/4	1 13/16	6,900	270,200	3,700	0.78	9	10	7.00	3  1/8	1 11/16	0.134	0.107	2 3/8
2 3/8	6.65	S-135 UE	11.300	248.800	0.280	1.815	1.843	0.867	1.733	27,853	28,079	NC26	3 5/8	1 1/2	9,000	390,300	4,900	0.80	9	10	7.62	3  13/32	1 3/8	0.132	0.117	2 3/8
												HT26	3 3/8	1 5/8	9,500	353,400	5,700	0.84	9	12	7.35	NA	1 1/2	0.133	0.112	2 3/8
												SLH90	3 1/4	1 11/16	7,700	311,500	4,200	0.68	9	10	7.10	3  7/32	1 9/16	0.133	0.109	2 3/8
												GPDS26	3 1/2	1 11/16	9,700	333,900	5,800	0.86	9	10	7.35	3  5/16	1 9/16	0.133	0.112	2 3/8
2 3/8	6.65	Z-140 UE	11.700	258.000	0.280	1.815	1.843	0.867	1.733	28,884	29,119	XT24	3 1/8	1 1/2	9,500	261,500	5,700	0.81	10	15	7.32	2  15/16	1 3/8	0.131	0.112	2 3/8
												XT26	3 3/8	1 5/8	12,600	330,600	7,600	1.08	10	15	7.52	3  1/32	1 1/2	0.132	0.115	2 3/8
												HT26	3 3/8	1 5/8	9,500	353,400	5,700	0.81	9	12	7.35	NA	1 1/2	0.133	0.112	2 3/8
												GPDS26	3 1/2	1 5/8	10,500	353,400	6,300	0.90	9	10	7.39	3  5/16	1 1/2	0.133	0.113	2 3/8
2 3/8	6.65	V-150 UE	12.500	276.400	0.280	1.815	1.843	0.867	1.733	30,947	31,199	XT24	3 1/8	1 3/8	10,400	295,400	6,200	0.83	10	15	7.41	2  15/16	1 1/4	0.130	0.113	2 3/8
												XT26	3 3/8	1 1/2	13,200	367,400	7,900	1.06	10	15	7.62	3	1 3/8	0.131	0.117	2 3/8
												HT26	3 3/8	1 1/2	10,100	390,300	6,100	0.81	9	12	7.45	NA	1 3/8	0.131	0.114	2 3/8
												GPDS26	3 1/2	1 1/2	11,200	390,300	6,700	0.90	9	10	7.48	3  9/32	1 3/8	0.132	0.114	2 3/8

2 7/8′′ API Especificaciones de tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Tipo de grado y malestar	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Presión Interna	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
2 7/8	6.65	E-75 UI	8.100	135.900	0.217	2.441	1.812	1.121	2.241	9,907	10,467	XT26	3 3/8	1 3/4	11,500	290,900	6,900	1.42	10	15	7.43	2  29/32	1 5/8	0.234	0.114	2 7/8
		G-105 UI	11.300	190.300	0.217	2.441	1.812	1.121	2.241	13,869	14,020	XT26	3 3/8	1 3/4	11,500	290,900	6,900	1.02	10	15	7.43	3  1/16	1 5/8	0.234	0.114	2 7/8
		S-135 IU	14.500	244.600	0.217	2.441	1.812	1.121	2.241	17,832	17,034	XT26	3 3/8	1 3/4	11,500	290,900	6,900	0.79	10	15	7.43	3  7/32	1 5/8	0.234	0.114	2 7/8
		V-150 UI	16.200	271,800	0.217	2.441	1.812	1.121	2.241	19,813	18,398	XT26	3 3/8	1 3/4	11,500	290,900	6,900	0.71	10	15	7.43	3  9/32	1 5/8	0.234	0.114	2 7/8
		X-95 UI	10.200	172.100	0.217	2.441	1.812	1.121	2.241	12,548	12,940	XT26	3 3/8	1 3/4	11,500	290,900	6,900	1.13	10	15	7.43	3  1/32	1 5/8	0.234	0.114	2 7/8
		Z-140 UI	15.100	253.700	0.217	2.441	1.812	1.121	2.241	18,492	17,500	XT26	3 3/8	1 3/4	11,500	290,900	6,900	0.76	10	15	7.43	3  1/4	1 5/8	0.234	0.114	2 7/8
2 7/8	6.85	E-75 UE	8.100	135.900	0.217	2.441	1.812	1.121	2.241	9,907	10,467	NC31	4 1/8	2 5/32	11,500	434,500	6,200	1.42	9	11	7.88	3  11/16	2 1/32	0.239	0.120	2 7/8
			8.100	135.900	0.217	2.441	1.812	1.121	2.241	9,907	10,467	HT31	4	2 5/32	14,900	434,500	8,900	1.84	9	13	7.83	3  1/2	2 1/32	0.239	0.120	2 7/8
			8.100	135.900	0.217	2.441	1.812	1.121	2.241	9,907	10,467	XT31	4	2 3/8	13,200	309,100	7,900	1.63	10	15	7.75	3  13/32	2 1/4	0.242	0.118	2 7/8
		E-75 UI	8.100	135.900	0.217	2.441	1.812	1.121	2.241	9,907	10,467	NC26	3 3/8	1 3/4	6,900	313,700	3,900	0.85	9	10	7.19	3  9/32	1 5/8	0.236	0.110	2 7/8
			8.100	135.900	0.217	2.441	1.812	1.121	2.241	9,907	10,467	HT26	3 3/8	1 3/4	8,700	313,700	5,200	1.07	9	12	7.27	NA	1 5/8	0.235	0.111	2 7/8
		G-105 UE	11.300	190.300	0.217	2.441	1.812	1.121	2.241	13,869	14,020	NC31	4 1/8	2 5/32	11,500	434,500	6,200	1.02	9	11	7.88	3  13/16	2 1/32	0.239	0.120	2 7/8
			11.300	190.300	0.217	2.441	1.812	1.121	2.241	13,869	14,020	HT31	4	2 5/32	14,900	434,500	8,900	1.32	9	13	7.83	3  5/8	2 1/32	0.239	0.120	2 7/8
			11.300	190.300	0.217	2.441	1.812	1.121	2.241	13,869	14,020	XT31	4	2 3/8	13,200	309,100	7,900	1.17	10	15	7.75	3  17/32	2 1/4	0.242	0.118	2 7/8
		G-105 UI	11.300	190.300	0.217	2.441	1.812	1.121	2.241	13,869	14,020	NC26	3 5/8	1 3/4	7,200	313,700	3,900	0.64	9	10	7.46	3  13/32	1 5/8	0.236	0.114	2 7/8
			11.300	190.300	0.217	2.441	1.812	1.121	2.241	13,869	14,020	HT26	3 3/8	1 3/4	8,700	313,700	5,200	0.77	9	12	7.27	NA	1 5/8	0.235	0.111	2 7/8
		S-135 UE	14.500	244.600	0.217	2.441	1.812	1.121	2.241	17,832	17,034	NC31	4 1/8	2 1/8	11,900	447,100	6,400	0.82	9	11	7.91	3  29/32	2	0.239	0.121	2 7/8
			14.500	244.600	0.217	2.441	1.812	1.121	2.241	17,832	17,034	HT31	4	2 5/32	14,900	434,500	8,900	1.03	9	13	7.83	3  23/32	2 1/32	0.239	0.120	2 7/8
			14.500	244.600	0.217	2.441	1.812	1.121	2.241	17,832	17,034	XT31	4	2 3/8	13,200	309,100	7,900	0.91	10	15	7.75	3  5/8	2 1/4	0.242	0.118	2 7/8
		S-135 IU	14.500	244.600	0.217	2.441	1.812	1.121	2.241	17,832	17,034	NC26	3 5/8	1 1/2	9,000	390,300	4,900	0.62	9	10	7.64	3  17/32	1 3/8	0.234	0.117	2 7/8
			14.500	244.600	0.217	2.441	1.812	1.121	2.241	17,832	17,034	HT26	3 1/2	1 1/2	12,100	390,300	7,300	0.83	9	12	7.60	3  5/16	1 3/8	0.233	0.116	2 7/8
		V-150 UE	16.200	271,800	0.217	2.441	1.812	1.121	2.241	19,813	18,398	HT31	4	2 5/32	14,900	434,500	8,900	0.92	9	13	7.83	3  25/32	2 1/32	0.239	0.120	2 7/8
			16.200	271,800	0.217	2.441	1.812	1.121	2.241	19,813	18,398	XT31	4	2 3/8	13,200	309,100	7,900	0.81	10	15	7.75	3  11/16	2 1/4	0.242	0.118	2 7/8
		V-150 UI	16.200	271,800	0.217	2.441	1.812	1.121	2.241	19,813	18,398	HT26	3 1/2	1 1/2	12,100	390,300	7,300	0.75	9	12	7.60	3  3/8	1 3/8	0.233	0.116	2 7/8
		X-95 UE	10.200	172.100	0.217	2.441	1.812	1.121	2.241	12,548	12,940	NC31	4 1/8	2 5/32	11,500	434,500	6,200	1.13	9	11	7.88	3  3/4	2 1/32	0.239	0.120	2 7/8
			10.200	172.100	0.217	2.441	1.812	1.121	2.241	12,548	12,940	HT31	4	2 5/32	14,900	434,500	8,900	1.46	9	13	7.83	3  19/32	2 1/32	0.239	0.120	2 7/8
			10.200	172.100	0.217	2.441	1.812	1.121	2.241	12,548	12,940	XT31	4	2 3/8	13,200	309,100	7,900	1.29	10	15	7.75	3  1/2	2 1/4	0.242	0.118	2 7/8
		X-95 UI	10.200	172.100	0.217	2.441	1.812	1.121	2.241	12,548	12,940	NC26	3 1/2	1 1/2	8,800	390,300	4,900	0.86	9	10	7.50	3  3/8	1 3/8	0.234	0.115	2 7/8
			10.200	172.100	0.217	2.441	1.812	1.121	2.241	12,548	12,940	HT26	3 3/8	1 3/4	8,700	313,700	5,200	0.85	9	12	7.27	NA	1 5/8	0.235	0.111	2 7/8
		Z-140 UE	15.100	253.700	0.217	2.441	1.812	1.121	2.241	18,492	17,500	HT31	4	2 5/32	14,900	434,500	8,900	0.99	9	13	7.83	3  3/4	2 1/32	0.239	0.120	2 7/8
			15.100	253.700	0.217	2.441	1.812	1.121	2.241	18,492	17,500	XT31	4	2 3/8	13,200	309,100	7,900	0.87	10	15	7.75	3  21/32	2 1/4	0.242	0.118	2 7/8
		Z-140 UI	15.100	253.700	0.217	2.441	1.812	1.121	2.241	18,492	17,500	HT26	3 1/2	1 1/2	12,100	390,300	7,300	0.80	9	12	7.60	3  11/32	1 3/8	0.233	0.116	2 7/8
2 7/8	10.40	E-75 UE	11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	NC31	4 1/8	2 1/8	11,900	447,100	6,400	1.03	9	11	11.14	3  13/16	2	0.188	0.170	2 7/8
			11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	NC26	3 1/2	1 1/2	8,800	390,300	4,900	0.76	9	10	10.79	3  13/32	1 3/8	0.183	0.165	2 7/8
			11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	SLH90	3 7/8	2	13,100	444,000	6,900	1.13	9	11	10.95	3  19/32	1 7/8	0.187	0.168	2 7/8
			11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	HT31	4 1/8	2 1/8	16,600	447,100	10,000	1.43	9	13	11.26	3  19/32	2	0.188	0.172	2 7/8
			11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	XT31	3 7/8	2 1/8	16,600	415,100	10,000	1.43	10	15	11.06	3  3/8	2	0.188	0.169	2 7/8
		E-75 UI	11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	HT26	3 1/2	1 1/2	12,100	390,300	7,300	1.04	9	12	10.85	3  3/16	1 3/8	0.182	0.166	2 7/8
			11.600	214.300	0.362	2.151	2.858	1.602	3.204	16,526	16,509	XT26	3 1/2	1 1/2	14,800	367,400	8,900	1.28	10	15	11.02	2  31/32	1 3/8	0.181	0.168	2 7/8
		G-105 UE	16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	NC31	4 1/8	2	13,200	495,700	7,100	0.81	9	11	11.27	3  15/16	1 7/8	0.187	0.172	2 7/8
			16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	SLH90	3 7/8	2	13,100	444,000	6,900	0.81	9	11	10.95	3  23/32	1 7/8	0.187	0.168	2 7/8
			16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	HT31	4 1/8	2 1/8	16,600	447,100	10,000	1.02	9	13	11.26	3  3/4	2	0.188	0.172	2 7/8
			16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	XT31	3 7/8	2 1/8	16,600	415,100	10,000	1.02	10	15	11.06	3  17/32	2	0.188	0.169	2 7/8
		G-105 UI	16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	NC26	3 1/2	1 1/2	8,800	390,300	4,900	0.54	9	10	10.76	NA	1 3/8	0.183	0.165	2 7/8
			16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	HT26	3 5/8	1 1/2	13,100	390,300	7,900	0.81	9	12	10.99	3  3/8	1 3/8	0.182	0.168	2 7/8
			16.200	300,100	0.362	2.151	2.858	1.602	3.204	23,137	23,112	XT26	3 1/2	1 1/2	14,800	367,400	8,900	0.91	10	15	11.02	3  5/32	1 3/8	0.181	0.168	2 7/8
		S-135 UE	20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	NC31	4 1/8	2	13,200	495,700	7,100	0.63	9	11	11.29	4  1/16	1 7/8	0.187	0.173	2 7/8
			20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	SLH90	3 7/8	2	13,100	444,000	6,900	0.63	9	11	10.95	3  27/32	1 7/8	0.187	0.168	2 7/8
			20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	HT31	4 1/8	2	18,900	495,700	11,300	0.91	9	13	11.39	3  27/32	1 7/8	0.187	0.174	2 7/8
			20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	XT31	3 7/8	2 1/8	16,600	415,100	10,000	0.80	10	15	11.06	3  11/16	2	0.188	0.169	2 7/8
			20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	GPDS31	4 1/8	2	17,200	495,700	10,300	0.83	9	11	11.27	3  15/16	1 7/8	0.187	0.172	2 7/8
		S-135 IU	20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	NC26	3 5/8	1 1/2	9,000	390,300	4,900	0.43	9	10	10.90	NA	1 3/8	0.183	0.167	2 7/8
			20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	HT26	3 5/8	1 1/2	13,100	390,300	7,900	0.63	9	12	10.99	3  9/16	1 3/8	0.182	0.168	2 7/8
			20.800	385.800	0.362	2.151	2.858	1.602	3.204	29,747	29,716	XT26	3 1/2	1 3/8	15,900	401,300	9,500	0.76	10	15	11.11	3  5/16	1 1/4	0.180	0.170	2 7/8
		V-150 UE	23.100	428.700	0.362	2.151	2.858	1.602	3.204	33,052	33,018	HT31	4 1/8	2	18,900	495,700	11,300	0.82	9	13	11.39	3  29/32	1 7/8	0.187	0.174	2 7/8
			23.100	428.700	0.362	2.151	2.858	1.602	3.204	33,052	33,018	XT31	4	2	20,400	463,700	12,200	0.88	10	15	11.38	3  23/32	1 7/8	0.187	0.174	2 7/8
			23.100	428.700	0.362	2.151	2.858	1.602	3.204	33,052	33,018	GPDS31	4 1/8	2	17,200	495,700	10,300	0.74	9	11	11.27	4	1 7/8	0.187	0.172	2 7/8
		V-150 UI	23.100	428.700	0.362	2.151	2.858	1.602	3.204	33,052	33,018	HT26	3 5/8	1 1/4	15,300	455,100	9,200	0.66	9	12	11.15	3  9/16	1 1/8	0.180	0.171	2 7/8
			23.100	428.700	0.362	2.151	2.858	1.602	3.204	33,052	33,018	XT26	3 1/2	1 1/4	16,400	432,200	9,800	0.71	10	15	11.19	3  3/8	1 1/8	0.179	0.171	2 7/8
		X-95 UE	14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	NC31	4 1/8	2	13,200	495,700	7,100	0.90	9	11	11.27	3  29/32	1 7/8	0.187	0.172	2 7/8
			14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	SLH90	3 7/8	2	13,100	444,000	6,900	0.90	9	11	10.95	3  11/16	1 7/8	0.187	0.168	2 7/8
			14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	HT31	4 1/8	2 1/8	16,600	447,100	10,000	1.14	9	13	11.26	3  23/32	2	0.188	0.172	2 7/8
			14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	XT31	3 7/8	2 1/8	16,600	415,100	10,000	1.14	10	15	11.06	3  1/2	2	0.188	0.169	2 7/8
		X-95 UI	14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	NC26	3 1/2	1 1/2	8,800	390,300	4,900	0.60	9	10	10.76	NA	1 3/8	0.183	0.165	2 7/8
			14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	HT26	3 1/2	1 1/2	12,100	390,300	7,300	0.83	9	12	10.85	3  5/16	1 3/8	0.182	0.166	2 7/8
			14.600	271.500	0.362	2.151	2.858	1.602	3.204	20,933	20,911	XT26	3 1/2	1 1/2	14,800	367,400	8,900	1.01	10	15	11.02	3  3/32	1 3/8	0.181	0.168	2 7/8
		Z-140 UE	21.600	400.100	0.362	2.151	2.858	1.602	3.204	30,849	30,817	HT31	4 1/8	2	18,900	495,700	11,300	0.88	9	13	11.39	3  7/8	1 7/8	0.187	0.174	2 7/8
			21.600	400.100	0.362	2.151	2.858	1.602	3.204	30,849	30,817	XT31	4	2	20,400	463,700	12,200	0.94	10	15	11.38	3  21/32	1 7/8	0.187	0.174	2 7/8
			21.600	400.100	0.362	2.151	2.858	1.602	3.204	30,849	30,817	GPDS31	4 1/8	2	17,200	495,700	10,300	0.80	9	11	11.27	3  15/16	1 7/8	0.187	0.172	2 7/8
		Z-140 UI	21.600	400.100	0.362	2.151	2.858	1.602	3.204	30,849	30,817	HT26	3 5/8	1 1/4	15,300	455,100	9,200	0.71	9	12	11.15	3  17/32	1 1/8	0.180	0.171	2 7/8
			21.600	400.100	0.362	2.151	2.858	1.602	3.204	30,849	30,817	XT26	3 1/2	1 1/4	16,400	432,200	9,800	0.76	10	15	11.19	3  5/16	1 1/8	0.179	0.171	2 7/8

3.5′′ Especificaciones de tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Tipo de grado y malestar	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Presión Interna	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
3 1/2	9.50	E-75 UE	14.100	194.300	0.254	2.992	2.590	1.961	3.923	9.525	10,001	NC38	4 3/4	2 11/16	18,100	587,300	9,700	1.28	10	12.5	11.07	4  13/32	2 9/16	0.360	0.169	3 1/2
			14.100	194.300	0.254	2.992	2.590	1.961	3.923	9,525	10,001	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.79	10	15.5	11.31	4  5/32	2 9/16	0.360	0.173	3 1/2
			14.100	194.300	0.254	2.992	2.590	1.961	3.923	9,525	10,001	SLH90	4 3/4	2 11/16	18,688	534,200	11,100	1.33	10	12.5	11.07	4  3/16	2 9/16	0.360	0.169	3 1/2
			14.100	194.300	0.254	2.992	2.590	1.961	3.923	9,525	10,001	XT38	4 3/4	2 13/16	23,900	473,000	14,300	1.70	10	15	11.08	4	2 11/16	0.362	0.170	3 1/2
3 1/2	9.50	E-75 UI	14.100	194.300	0.254	2.992	2.590	1.961	3.923	9,525	10,001	NC31	4 1/8	2 1/8	11,900	447,100	6,400	0.84	9	11	10.49	3  7/8	2	0.354	0.161	3 1/2
			14.100	194.300	0.254	2.992	2.590	1.961	3.923	9,525	10,001	HT31	4 1/8	2 1/8	16,600	447,100	10,000	1.18	9	13	10.62	3  11/16	2	0.353	0.162	3 1/2
			14.100	194.300	0.254	2.992	2.590	1.961	3.923	9,525	10,001	XT31	4	2 1/8	18,600	415,100	11,200	1.32	10	15	10.61	3  1/2	2	0.352	0.162	3 1/2
3 1/2	9.50	G-105 UE	19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	NC38	4 3/4	2 11/16	18,100	587,300	9,700	0.91	10	12.5	11.07	4  17/32	2 9/16	0.360	0.169	3 1/2
			19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.28	10	15.5	11.31	4  9/32	2 9/16	0.360	0.173	3 1/2
			19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	SLH90	4 3/4	2 11/16	18,700	534,200	11,100	0.94	10	12.5	11.07	4  5/16	2 9/16	0.360	0.169	3 1/2
			19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	XT38	4 3/4	2 13/16	23,900	473,000	14,300	1.21	10	15	11.08	4  5/32	2 11/16	0.362	0.170	3 1/2
3 1/2	9.50	G-105 UI	19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	NC31	4 1/8	2	13,200	495,700	7,100	0.67	9	11	10.61	4  1/16	1 7/8	0.352	0.162	3 1/2
			19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	HT31	4 1/8	2	18,900	495,700	11,300	0.95	9	13	10.74	3  27/32	1 7/8	0.351	0.164	3 1/2
			19.800	272.000	0.254	2.992	2.590	1.961	3.923	13,335	13,055	XT31	4	2 1/8	18,600	415,100	11,200	0.94	10	15	10.61	3  11/16	2	0.352	0.162	3 1/2
3 1/2	9.50	S-135 UE	25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	NC38	4 7/8	2 9/16	20,200	649,200	10,700	0.79	10	12.5	11.45	4  21/32	2 7/16	0.358	0.175	3 1/2
			25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	HT38	4 3/4	2 11/16	25,300	587,300	15,200	0.99	10	15.5	11.31	4  7/16	2 9/16	0.360	0.173	3 1/2
			25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	SLH90	4 3/4	2 9/16	20,900	596,100	12,400	0.82	10	12.5	11.24	4  7/16	2 7/16	0.358	0.172	3 1/2
			25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	XT38	4 3/4	2 13/16	23,900	473,000	14,300	0.94	10	15	11.08	4  9/32	2 11/16	0.362	0.170	3 1/2
3 1/2	9.50	S-135 IU	25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	NC31	4 1/8	2	13,200	495,700	7,100	0.52	9	11	10.61	NA	1 7/8	0.352	0.162	3 1/2
			25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	HT31	4 1/8	2	18,900	495,700	11,300	0.74	9	13	10.74	4	1 7/8	0.351	0.164	3 1/2
			25.500	349.700	0.254	2.992	2.590	1.961	3.923	17,145	15,748	XT31	4	2	20,400	463,700	12,200	0.80	10	15	10.74	3  13/16	1 7/8	0.350	0.164	3 1/2
3 1/2	9.50	V-150 UE	28.300	388.500	0.254	2.992	2.590	1.961	3.923	19,050	16,943	HT38	4 3/4	2 11/16	25,300	587,300	15,200	0.89	10	15.5	11.31	4  1/2	2 9/16	0.360	0.173	3 1/2
			28.300	388.500	0.254	2.992	2.590	1.961	3.923	19,050	16,943	XT38	4 3/4	2 13/16	23,900	473,000	14,300	0.84	10	15	11.08	4  11/32	2 11/16	0.362	0.170	3 1/2
3 1/2	9.50	V-150 UI	28.300	388.500	0.254	2.992	2.590	1.961	3.923	19,050	16,943	HT31	4 1/4	1 3/4	23,400	584,100	14,000	0.83	9	13	11.14	4	1 5/8	0.348	0.170	3 1/2
			28.300	388.500	0.254	2.992	2.590	1.961	3.923	19,050	16,943	XT31	4	2	20,400	463,700	12,200	0.72	10	15	10.74	3  29/32	1 7/8	0.350	0.164	3 1/2
3 1/2	9.50	X-95 UE	17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	NC38	4 3/4	2 11/16	18,100	587,300	9,700	1.01	10	12.5	11.07	4  15/32	2 9/16	0.360	0.169	3 1/2
			17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.41	10	15.5	11.31	4  1/4	2 9/16	0.360	0.173	3 1/2
			17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	SLH90	4 3/4	2 11/16	18,700	534,200	11,100	1.04	10	12.5	11.07	4  9/32	2 9/16	0.360	0.169	3 1/2
			17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	XT38	4 3/4	2 13/16	23,900	473,000	14,300	1.34	10	15	11.08	4  3/32	2 11/16	0.362	0.170	3 1/2
3 1/2	9.50	X-95 UI	17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	NC31	4 1/8	2	13,200	495,700	7,100	0.74	9	11	10.61	4	1 7/8	0.352	0.162	3 1/2
			17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	HT31	4 1/8	2 1/8	16,600	447,100	10,000	0.93	9	13	10.62	3  13/16	2	0.353	0.162	3 1/2
			17.900	246.100	0.254	2.992	2.590	1.961	3.923	12,065	12,077	XT31	4	2 1/8	18,600	415,100	11,200	1.04	10	15	10.61	3  5/8	2	0.352	0.162	3 1/2
3 1/2	9.50	Z-140 UE	26.400	362,600	0.254	2.992	2.590	1.961	3.923	17,780	16,158	HT38	4 3/4	2 11/16	25,300	587,300	15,200	0.96	10	15.5	11.31	4  15/32	2 9/16	0.360	0.173	3 1/2
			26.400	362,600	0.254	2.992	2.590	1.961	3.923	17,780	16,158	XT38	4 3/4	2 13/16	23,900	473,000	14,300	0.91	10	15	11.08	4  5/16	2 11/16	0.362	0.170	3 1/2
3 1/2	9.50	Z-140 UI	26.400	362,600	0.254	2.992	2.590	1.961	3.923	17,780	16,158	HT31	4 1/8	2	18,900	495,700	11,300	0.72	9	13	10.74	4  1/32	1 7/8	0.351	0.164	3 1/2
			26.400	362,600	0.254	2.992	2.590	1.961	3.923	17,780	16,158	XT31	4	2	20,400	463,700	12,200	0.77	10	15	10.74	3  27/32	1 7/8	0.350	0.164	3 1/2
3 1/2	13.30	E-75 UE	18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	NC38	4 3/4	2 11/16	18,100	587,300	9,700	0.97	10	12.5	14.24	4  1/2	2 9/16	0.310	0.218	3 1/2
			18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.36	10	15.5	14.45	4  1/4	2 9/16	0.310	0.221	3 1/2
			18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	SLH90	4 3/4	2 11/16	18,700	534,200	11,100	1.01	10	12.5	14.24	4  9/32	2 9/16	0.310	0.218	3 1/2
			18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.49	10	15	14.42	4  1/32	2 9/16	0.310	0.221	3 1/2
3 1/2	13.30	E-75 UI	18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	NC31	4 1/8	2	13,200	495,700	7,100	0.71	9	11	13.93	4  1/32	1 7/8	0.302	0.213	3 1/2
			18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	HT31	4 1/8	2 1/8	16,600	447,100	10,000	0.89	9	13	13.91	3  27/32	2	0.303	0.213	3 1/2
			18.600	271.600	0.368	2.764	3.621	2.572	5.144	13,800	14,113	XT31	4	2 1/8	18,600	415,100	11,200	1.00	10	15	13.87	3  5/8	2	0.302	0.212	3 1/2
3 1/2	13.30	G-105 UE	26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	NC38	5	2 7/16	22,200	708,100	11,700	0.85	10	12.5	15.00	4  21/32	2 5/16	0.306	0.229	3 1/2
			26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	HT38	4 3/4	2 11/16	25,300	587,300	15,200	0.97	10	15.5	14.45	4  7/16	2 9/16	0.310	0.221	3 1/2
			26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	SLH90	4 3/4	2 9/16	20,900	596,100	12,400	0.80	10	12.5	14.41	4  7/16	2 7/16	0.308	0.220	3 1/2
			26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.07	10	15	14.42	4  7/32	2 9/16	0.310	0.221	3 1/2
3 1/2	13.30	G-105 UI	26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	NC31	4 1/8	2	13,200	495,700	7,100	0.51	9	11	13.93	NA	1 7/8	0.302	0.213	3 1/2
			26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	HT31	4 1/8	2	18,900	495,700	11,300	0.73	9	13	14.04	4	1 7/8	0.301	0.215	3 1/2
			26.000	380,200	0.368	2.764	3.621	2.572	5.144	19,320	19,758	XT31	4 1/8	2	21,100	463,700	12,700	0.81	10	15	14.21	3  13/16	1 7/8	0.300	0.217	3 1/2
3 1/2	13.30	S-135 UE	33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	NC38	5	2 1/8	26,500	842,400	14,000	0.79	10	12.5	15.37	4  13/16	2	0.302	0.235	3 1/2
			33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	HT38	4 3/4	2 9/16	26,900	649,200	16,100	0.81	10	15.5	14.63	4  9/16	2 7/16	0.308	0.224	3 1/2
			33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	SLH90	4 3/4	2 9/16	20,900	596,100	12,400	0.63	10	12.5	14.41	4  19/32	2 7/16	0.308	0.220	3 1/2
			33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	XT38	4 3/4	2 11/16	27,700	537,800	16,600	0.83	10	15	14.42	4  13/32	2 9/16	0.310	0.221	3 1/2
			33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	GPDS38	4 7/8	2 9/16	25,700	649,200	15,400	0.77	10	12.5	14.62	4  11/16	2 7/16	0.308	0.224	3 1/2
3 1/2	13.30	S-135 IU	33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	NC31	4 1/8	2	13,200	495,700	7,100	0.40	9	11	13.93	NA	1 7/8	0.302	0.213	3 1/2
			33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	HT31	4 1/8	2	18,900	495,700	11,300	0.57	9	13	14.04	NA	1 7/8	0.301	0.215	3 1/2
			33.400	488.800	0.368	2.764	3.621	2.572	5.144	24,840	25,404	XT31	4 1/8	1 7/8	23,400	509,400	14,000	0.70	10	15	14.34	3  31/32	1 3/4	0.298	0.219	3 1/2
3 1/2	13.30	V-150 UE	37.100	543.100	0.368	2.764	3.621	2.572	5.144	27,600	28,226	HT38	4 3/4	2 9/16	26,900	649,200	16,100	0.73	10	15.5	14.63	4  5/8	2 7/16	0.308	0.224	3 1/2
			37.100	543.100	0.368	2.764	3.621	2.572	5.144	27,600	28,226	XT38	4 3/4	2 9/16	31,300	599,600	18,800	0.84	10	15	14.59	4 7/16	2 7/16	0.308	0.223	3 1/2
			37.100	543.100	0.368	2.764	3.621	2.572	5.144	27,600	28,226	GPDS38	5	2 9/16	25,800	649,200	15,500	0.70	10	12.5	14.84	4 3/4	2 7/16	0.308	0.227	3 1/2
3 1/2	13.30	V-150 UI	37.100	543.100	0.368	2.764	3.621	2.572	5.144	27,600	28,226	HT31	4 1/4	1 3/4	23,400	584,100	14,000	0.63	9	13	14.47	4  1/4	1 5/8	0.298	0.221	3 1/2
			37.100	543.100	0.368	2.764	3.621	2.572	5.144	27,600	28,226	XT31	4 1/8	1 3/4	25,000	552,100	15,000	0.67	10	15	14.47	4  1/16	1 5/8	0.297	0.221	3 1/2
3 1/2	13.30	X-95 UE	23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	NC38	5	2 9/16	20,300	649,200	10,700	0.86	10	12.5	14.84	4  19/32	2 7/16	0.308	0.227	3 1/2
			23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.08	10	15.5	14.45	4  3/8	2 9/16	0.310	0.221	3 1/2
			23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	SLH90	4 3/4	2 11/16	18,700	534,200	11,100	0.80	10	12.5	14.24	4  3/8	2 9/16	0.310	0.218	3 1/2
			23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.18	10	15	14.42	4  5/32	2 9/16	0.310	0.221	3 1/2
3 1/2	13.30	X-95 UI	23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	NC31	4 1/8	2	13,200	495,700	7,100	0.56	9	11	13.93	NA	1 7/8	0.302	0.213	3 1/2
			23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	HT31	4 1/8	2	18,900	495,700	11,300	0.80	9	13	14.04	3  15/16	1 7/8	0.301	0.215	3 1/2
			23.500	344.000	0.368	2.764	3.621	2.572	5.144	17,480	17,877	XT31	4	2 1/8	18,600	415,100	11,200	0.79	10	15	13.87	3  25/32	2	0.302	0.212	3 1/2
3 1/2	13.30	Z-140 UE	34.600	506.900	0.368	2.764	3.621	2.572	5.144	25,760	26,345	HT38	4 3/4	2 9/16	26,900	649,200	16,100	0.78	10	15.5	14.63	4  9/16	2 7/16	0.308	0.224	3 1/2
			34.600	506.900	0.368	2.764	3.621	2.572	5.144	25,760	26,345	XT38	4 3/4	2 9/16	31,300	599,600	18,800	0.90	10	15	14.59	4  3/8	2 7/16	0.308	0.223	3 1/2
			34.600	506.900	0.368	2.764	3.621	2.572	5.144	25,760	26,345	GPDS38	5	2 9/16	25,800	649,200	15,500	0.75	10	12.5	14.84	4  11/16	2 7/16	0.308	0.227	3 1/2
3 1/2	13.30	Z-140 UI	34.600	506.900	0.368	2.764	3.621	2.572	5.144	25,760	26,345	HT31	4 1/8	1 7/8	19,900	541,400	11,900	0.58	9	13	14.17	NA	1 3/4	0.300	0.217	3 1/2
			34.600	506.900	0.368	2.764	3.621	2.572	5.144	25,760	26,345	XT31	4 1/8	1 3/4	25,000	552,100	15,000	0.72	10	15	14.47	3  31/32	1 5/8	0.297	0.221	3 1/2
3 1/2	15.50	E-75 UE	21,100	322,800	0.449	2.602	4.304	2.923	5.847	16,838	16,774	NC38	5	2 9/16	20,300	649,200	10,700	0.96	10	12.5	16.94	4 17/32	2 7/16	0.276	0.259	3 1/2
			21,100	322,800	0.449	2.602	4.304	2.923	5.847	16,838	16,774	HT38	4 3/4	2 9/16	26,900	649,200	16,100	1.27	10	15.5	16.71	4 1/4	2 7/16	0.276	0.256	3 1/2
			21,100	322,800	0.449	2.602	4.304	2.923	5.847	16,838	16,774	XT38	4 3/4	2 9/16	31,300	599,600	18,800	1.48	10	15	16.68	4 1/32	2 7/16	0.276	0.255	3 1/2
		G-105 UE	29.500	451.900	0.449	2.602	4.304	2.923	5.847	23,573	23,484	NC38	5	2 1/8	26,500	842,400	14,000	0.90	10	12.5	17.50	4 23/32	2	0.269	0.268	3 1/2
			29.500	451.900	0.449	2.602	4.304	2.923	5.847	23,573	23,484	HT38	4 3/4	2 9/16	26,900	649,200	16,100	0.91	10	15.5	16.71	4 7/16	2 7/16	0.276	0.256	3 1/2
			29.500	451.900	0.449	2.602	4.304	2.923	5.847	23,573	23,484	NC40	5 1/4	2 9/16	27,800	838,300	14,600	0.94	9	12	17.24	4 15/16	2 7/16	0.276	0.264	3 1/2
			29.500	451.900	0.449	2.602	4.304	2.923	5.847	23,573	23,484	XT38	4 3/4	2 9/16	31,300	599,600	18,800	1.06	10	15	16.68	4 1/4	2 7/16	0.276	0.255	3 1/2
		S-135 UE	38.000	581.000	0.449	2.602	4.304	2.923	5.847	30,308	30,194	NC38	5	2 1/8	26,500	842,400	14,000	0.70	10	12.5	17.50	4 29/32	2	0.269	0.268	3 1/2
			38.000	581.000	0.449	2.602	4.304	2.923	5.847	30,308	30,194	HT38	4 3/4	2 7/16	28,400	708,100	17,000	0.75	10	15.5	16.90	4 19/32	2 5/16	0.273	0.258	3 1/2
			38.000	581.000	0.449	2.602	4.304	2.923	5.847	30,308	30,194	NC40	5 1/2	2 1/4	32,900	980,000	17,100	0.87	10	12.5	18.31	5 3/32	2 1/8	0.271	0.280	3 1/2
			38.000	581.000	0.449	2.602	4.304	2.923	5.847	30,308	30,194	XT38	4 3/4	2 7/16	34,200	658,500	20,500	0.90	10	15	16.86	4 3/8	2 5/16	0.273	0.258	3 1/2
			38.000	581.000	0.449	2.602	4.304	2.923	5.847	30,308	30,194	XT39	4 7/8	2 7/16	38,500	788,600	23,100	1.01	10	15	17.09	4 3/8	2 5/16	0.273	0.261	3 1/2
			38.000	581.000	0.449	2.602	4.304	2.923	5.847	30,308	30,194	GPDS38	5	2 7/16	29,200	708,100	17,500	0.77	10	12.5	17.11	4 23/32	2 5/16	0.274	0.262	3 1/2
		V-150 UE	42.200	645.500	0.449	2.602	4.304	2.923	5.847	33,675	33,549	HT38	5	2 1/4	37,700	790,900	22,600	0.89	10	15.5	17.63	4 19/32	2 1/8	0.270	0.270	3 1/2
			42.200	645.500	0.449	2.602	4.304	2.923	5.847	33,675	33,549	XT38	4 3/4	2 1/4	36,300	741,400	21,800	0.86	10	15	17.11	4 13/32	2 1/8	0.271	0.262	3 1/2
			42.200	645.500	0.449	2.602	4.304	2.923	5.847	33,675	33,549	XT39	4 7/8	2 1/4	40,700	871,400	24,400	0.96	10	15	17.35	4 3/8	2 1/8	0.270	0.265	3 1/2
			42.200	645.500	0.449	2.602	4.304	2.923	5.847	33,675	33,549	GPDS38	5	2 1/4	33,900	790,900	20,300	0.80	10	12.5	17.35	4 23/32	2 1/8	0.271	0.265	3 1/2
		X-95 UE	26.700	408,800	0.449	2.602	4.304	2.923	5.847	21,328	21,247	NC38	5	2 7/16	22,200	708,100	11,700	0.83	10	12.5	17.11	4 21/32	2 5/16	0.274	0.262	3 1/2
			26.700	408,800	0.449	2.602	4.304	2.923	5.847	21,328	21,247	HT38	4 3/4	2 9/16	26,900	649,200	16,100	1.01	10	15.5	16.71	4 3/8	2 7/16	0.276	0.256	3 1/2
			26.700	408,800	0.449	2.602	4.304	2.923	5.847	21,328	21,247	XT38	4 3/4	2 9/16	31,300	599,600	18,800	1.17	10	15	16.68	4 5/32	2 7/16	0.276	0.255	3 1/2
		Z-140 UE	39.400	602,500	0.449	2.602	4.304	2.923	5.847	31,430	31,312	HT38	4 3/4	2 7/16	28,400	708,100	17,000	0.72	10	15.5	16.90	4 5/8	2 5/16	0.273	0.258	3 1/2
			39.400	602,500	0.449	2.602	4.304	2.923	5.847	31,430	31,312	XT38	4 3/4	2 7/16	34,200	658,500	20,500	0.87	10	15	16.86	4 13/32	2 5/16	0.273	0.258	3 1/2
			39.400	602,500	0.449	2.602	4.304	2.923	5.847	31,430	31,312	XT39	4 7/8	2 7/16	38,500	788,600	23,100	0.98	10	15	17.09	4 13/32	2 5/16	0.273	0.261	3 1/2
			39.400	602,500	0.449	2.602	4.304	2.923	5.847	31,430	31,312	GPDS38	5	2 7/16	29,200	708,100	17,500	0.74	10	12.5	17.11	4 3/4	2 5/16	0.274	0.262	3 1/2

4′′ Especificaciones de tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Tipo de grado y malestar	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Presión Interna	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
4	11.85	E-75 UI	19.500	230.800	0.262	3.476	3.077	2.700	5.400	8,597	8,381	NC40	5 1/4	2 13/16	23,500	711,600	12,400	1.21	9	12	13.41	4 3/4	2 11/16	0.481	0.205	4
			19.500	230.800	0.262	3.476	3.077	2.700	5.400	8,597	8,381	SH	4 3/4	2 9/16	15,300	512,000	8,100	0.78	9	12	12.91	4 3/8	2 7/16	0.477	0.198	4
			19.500	230.800	0.262	3.476	3.077	2.700	5.400	8,597	8,381	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.30	10	15.5	13.08	4 9/32	2 9/16	0.477	0.200	4
			19.500	230.800	0.262	3.476	3.077	2.700	5.400	8,597	8,381	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.42	10	15	13.04	4 1/16	2 9/16	0.477	0.199	4
			19.500	230.800	0.262	3.476	3.077	2.700	5.400	8,597	8,381	XT39	4 7/8	2 13/16	32,900	603,000	19,700	1.69	10	15	13.08	4 5/32	2 11/16	0.479	0.200	4
4	11.85	G-105 UI	27.300	323,100	0.262	3.476	3.077	2.700	5.400	12,036	10,708	NC40	5 1/4	2 13/16	23,500	711,600	12,400	0.86	9	12	13.41	4 29/32	2 11/16	0.481	0.205	4
			27.300	323,100	0.262	3.476	3.077	2.700	5.400	12,036	10,708	SH	4 3/4	2 9/16	15,300	512,000	8,100	0.56	9	12	12.91	4 9/16	2 7/16	0.477	0.198	4
			27.300	323,100	0.262	3.476	3.077	2.700	5.400	12,036	10,708	HT38	4 3/4	2 9/16	26,900	649,200	16,100	0.99	10	15.5	13.27	4 13/32	2 7/16	0.475	0.203	4
			27.300	323,100	0.262	3.476	3.077	2.700	5.400	12,036	10,708	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.01	10	15	13.04	4 9/32	2 9/16	0.477	0.199	4
			27.300	323,100	0.262	3.476	3.077	2.700	5.400	12,036	10,708	XT39	4 7/8	2 13/16	32,900	603,000	19,700	1.21	10	15	13.08	4 11/32	2 11/16	0.479	0.200	4
4	11.85	S-135 IU	35,100	415.400	0.262	3.476	3.077	2.700	5.400	15,474	12,618	NC40	5 1/2	2 9/16	28,100	838,300	14,600	0.80	9	12	14.23	5 1/16	2 7/16	0.476	0.218	4
			35,100	415.400	0.262	3.476	3.077	2.700	5.400	15,474	12,618	SH	4 3/4	2 9/16	15,300	512,000	8,100	0.44	9	12	12.91	4 23/32	2 7/16	0.477	0.198	4
			35,100	415.400	0.262	3.476	3.077	2.700	5.400	15,474	12,618	HT38	4 3/4	2 7/16	28,400	708,100	17,000	0.81	10	15.5	13.45	4 17/32	2 5/16	0.473	0.206	4
			35,100	415.400	0.262	3.476	3.077	2.700	5.400	15,474	12,618	XT38	4 3/4	2 11/16	27,700	537,800	16,600	0.79	10	15	13.04	4 7/16	2 9/16	0.477	0.199	4
			35,100	415.400	0.262	3.476	3.077	2.700	5.400	15,474	12,618	XT39	4 7/8	2 13/16	32,900	603,000	19,700	0.94	10	15	13.08	4 1/2	2 11/16	0.479	0.200	4
4	11.85	V-150 UI	38.900	461.500	0.262	3.476	3.077	2.700	5.400	17,194	13,404	HT38	5	2 7/16	33,000	708,100	19,800	0.85	10	15.5	13.93	4 5/8	2 5/16	0.472	0.213	4
			38.900	461.500	0.262	3.476	3.077	2.700	5.400	17,194	13,404	XT38	4 3/4	2 9/16	31,300	599,600	18,800	0.80	10	15	13.23	4 15/32	2 7/16	0.475	0.202	4
			38.900	461.500	0.262	3.476	3.077	2.700	5.400	17,194	13,404	XT39	4 7/8	2 13/16	32,900	603,000	19,700	0.85	10	15	13.08	4 19/32	2 11/16	0.479	0.200	4
4	11.85	X-95 UI	24.700	292.300	0.262	3.476	3.077	2.700	5.400	10,889	9,978	NC40	5 1/4	2 13/16	23,500	711,600	12,400	0.95	9	12	13.41	4 27/32	2 11/16	0.481	0.205	4
			24.700	292.300	0.262	3.476	3.077	2.700	5.400	10,889	9,978	SH	4 3/4	2 9/16	15,300	512,000	8,100	0.62	9	12	12.91	4 1/2	2 7/16	0.477	0.198	4
			24.700	292.300	0.262	3.476	3.077	2.700	5.400	10,889	9,978	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.02	10	15.5	13.08	4 13/32	2 9/16	0.477	0.200	4
			24.700	292.300	0.262	3.476	3.077	2.700	5.400	10,889	9,978	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.12	10	15	13.04	4 3/16	2 9/16	0.477	0.199	4
			24.700	292.300	0.262	3.476	3.077	2.700	5.400	10,889	9,978	XT39	4 7/8	2 13/16	32,900	603,000	19,700	1.33	10	15	13.08	4 9/32	2 11/16	0.479	0.200	4
4	11.85	Z-140 UI	36.400	430.700	0.262	3.476	3.077	2.700	5.400	16,048	12,894	HT38	4 3/4	2 7/16	28,400	708,100	17,000	0.78	10	15.5	13.45	4 9/16	2 5/16	0.473	0.206	4
			36.400	430.700	0.262	3.476	3.077	2.700	5.400	16,048	12,894	XT38	4 3/4	2 11/16	27,700	537,800	16,600	0.76	10	15	13.04	4 15/32	2 9/16	0.477	0.199	4
			36.400	430.700	0.262	3.476	3.077	2.700	5.400	16,048	12,894	XT39	4 7/8	2 13/16	32,900	603,000	19,700	0.90	10	15	13.08	4 17/32	2 11/16	0.479	0.200	4
4	14.00	E-75 UE	23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	NC46	6	3 1/4	33,600	901,200	17,600	1.44	9	12	16.51	5  9/32	3 1/8	0.453	0.253	4
4	14.00	E-75 UI	23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	NC40	5 1/4	2 13/16	23,500	711,600	12,400	1.01	9	12	15.64	4 13/16	2 11/16	0.445	0.239	4
			23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	HT38	4 3/4	2 11/16	25,300	587,300	15,200	1.09	10	15.5	15.28	4 3/8	2 9/16	0.442	0.234	4
			23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	SH	4 3/4	2 7/16	17,100	570,900	9,100	0.73	9	12	15.31	4 7/16	2 5/16	0.440	0.234	4
			23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	HT40	5 1/4	2 13/16	31,900	711,600	19,100	1.37	9	15	15.93	4  19/32	2 11/16	0.444	0.244	4
			23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	XT38	4 3/4	2 11/16	27,700	537,800	16,600	1.19	10	15	15.25	4  5/32	2 9/16	0.442	0.233	4
			23.300	285.400	0.330	3.340	3.805	3.229	6.458	10,828	11,354	XT39	4 7/8	2 13/16	32,900	603,000	19,700	1.41	10	15	15.29	4  1/4	2 11/16	0.444	0.234	4
4	14.00	G-105 UE	32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	NC46	6	3 1/4	33,600	901,200	17,600	1.03	9	12	16.51	5  7/16	3 1/8	0.453	0.253	4
4	14.00	G-105 UI	32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	NC40	5 1/2	2 7/16	30,100	897,200	15,600	0.92	9	12	16.62	5	2 5/16	0.439	0.254	4
			32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	HT38	5	2 9/16	29,600	649,200	17,800	0.91	10	15.5	15.95	4  17/32	2 7/16	0.440	0.244	4
			32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	SH	4 3/4	2 7/16	17,100	570,900	9,100	0.52	9	12	15.31	4  21/32	2 5/16	0.440	0.234	4
			32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	HT40	5 1/4	2 13/16	31,900	711,600	19,100	0.98	9	15	15.93	4  25/32	2 11/16	0.444	0.244	4
			32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	XT38	4 3/4	2 11/16	27,700	537,800	16,600	0.85	10	15	15.25	4  3/8	2 9/16	0.442	0.233	4
			32.600	399.500	0.330	3.340	3.805	3.229	6.458	15,159	15,896	XT39	4 7/8	2 13/16	32,900	603,000	19,700	1.01	10	15	15.29	4  7/16	2 11/16	0.444	0.234	4
4	14.00	S-135 UE	41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	NC46	6	3	39,200	1,048,400	20,500	0.94	9	12	16.90	5  9/16	2 7/8	0.449	0.259	4
4	14.00	S-135 IU	41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	NC40	5 1/2	2	36,400	1,080,100	18,900	0.87	9	12	17.15	5  3/16	1 7/8	0.433	0.262	4
			41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	HT38	5	2 7/16	33,000	708,100	19,800	0.79	10	15.5	16.13	4  11/16	2 5/16	0.438	0.247	4
			41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	SH	4 3/4	2 7/16	17,100	570,900	9,100	0.41	9	12	15.31	NA	2 5/16	0.440	0.234	4
			41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	HT40	5 1/4	2 11/16	35,900	776,400	21,500	0.86	9	15	16.12	4  29/32	2 9/16	0.442	0.247	4
			41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	XT38	4 3/4	2 9/16	31,300	599,600	18,800	0.75	10	15	15.44	4  17/32	2 7/16	0.440	0.236	4
			41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	XT39	4 7/8	2 9/16	37,000	729,700	22,200	0.88	10	15	15.67	4  17/32	2 7/16	0.440	0.240	4
			41.900	513.600	0.330	3.340	3.805	3.229	6.458	19,491	20,141	GPDS40	5 1/4	2 11/16	32,700	776,400	19,600	0.78	9	12	15.82	5	2 9/16	0.443	0.242	4
4	14.00	V-150 UI	46.600	570.700	0.330	3.340	3.805	3.229	6.458	21,656	21,912	HT38	5	2 7/16	33,000	708,100	19,800	0.71	10	15.5	16.13	4  25/32	2 5/16	0.438	0.247	4
			46.600	570.700	0.330	3.340	3.805	3.229	6.458	21,656	21,912	HT40	5 1/4	2 11/16	35,900	776,400	21,500	0.77	9	15	16.12	5	2 9/16	0.442	0.247	4
			46.600	570.700	0.330	3.340	3.805	3.229	6.458	21,656	21,912	XT38	4 3/4	2 7/16	34,200	658,500	20,500	0.73	10	15	15.61	4  19/32	2 5/16	0.438	0.239	4
			46.600	570.700	0.330	3.340	3.805	3.229	6.458	21,656	21,912	XT39	4 7/8	2 9/16	37,000	729,700	22,200	0.79	10	15	15.67	4  5/8	2 7/16	0.440	0.240	4
			46.600	570.700	0.330	3.340	3.805	3.229	6.458	21,656	21,912	GPDS40	5 1/4	2 9/16	36,400	838,300	21,800	0.78	9	12	15.99	5  1/32	2 7/16	0.441	0.245	4
4	14.00	X-95 UE	29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	NC46	6	3 1/4	33,600	901,200	17,600	1.14	9	12	16.51	5  3/8	3 1/8	0.453	0.253	4
4	14.00	X-95 UI	29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	NC40	5 1/4	2 11/16	25,700	776,400	13,500	0.87	9	12	15.82	4  15/16	2 9/16	0.443	0.242	4
			29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	HT38	4 3/4	2 11/16	25,300	587,300	15,200	0.86	10	15.5	15.28	4  17/32	2 9/16	0.442	0.234	4
			29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	SH	4 3/4	2 7/16	17,100	570,900	9,100	0.58	9	12	15.31	4  19/32	2 5/16	0.440	0.234	4
			29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	HT40	5 1/4	2 13/16	31,900	711,600	19,100	1.08	9	15	15.93	4  23/32	2 11/16	0.444	0.244	4
			29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	XT38	4 3/4	2 11/16	27,700	537,800	16,600	0.94	10	15	15.25	4  5/16	2 9/16	0.442	0.233	4
			29.500	361.500	0.330	3.340	3.805	3.229	6.458	13,716	14,382	XT39	4 7/8	2 13/16	32,900	603,000	19,700	1.12	10	15	15.29	4  3/8	2 11/16	0.444	0.234	4
4	14.00	Z-140 UI	43.500	532.700	0.330	3.340	3.805	3.229	6.458	20,213	20,742	HT38	5	2 7/16	33,000	708,100	19,800	0.76	10	15.5	16.13	4  23/32	2 5/16	0.438	0.247	4
			43.500	532.700	0.330	3.340	3.805	3.229	6.458	20,213	20,742	HT40	5 1/4	2 11/16	35,900	776,400	21,500	0.83	9	15	16.12	4  15/16	2 9/16	0.442	0.247	4
			43.500	532.700	0.330	3.340	3.805	3.229	6.458	20,213	20,742	XT38	4 3/4	2 9/16	31,300	599,600	18,800	0.72	10	15	15.44	4  9/16	2 7/16	0.440	0.236	4
			43.500	532.700	0.330	3.340	3.805	3.229	6.458	20,213	20,742	XT39	4 7/8	2 9/16	37,000	729,700	22,200	0.85	10	15	15.67	4  9/16	2 7/16	0.440	0.240	4
			43.500	532.700	0.330	3.340	3.805	3.229	6.458	20,213	20,742	GPDS40	5 1/4	2 9/16	36,400	838,300	21,800	0.84	9	12	15.99	5	2 7/16	0.441	0.245	4
4	15.70	E-75 UE	25.800	324,100	0.380	3.240	4.322	3.578	7.157	12,469	12,896	NC46	6	3	39,200	1,048,400	20,500	1.52	9	12	18.34	5  5/16	2 7/8	0.424	0.281	4
4	15.70	E-75 UI	25.800	324,100	0.380	3.240	4.322	3.578	7.157	12,469	12,896	NC40	5 1/4	2 13/16	23,500	711,600	12,400	0.91	9	12	17.22	4  7/8	2 11/16	0.421	0.263	4
			25.800	324,100	0.380	3.240	4.322	3.578	7.157	12,469	12,896	HT40	5 1/4	2 13/16	31,900	711,600	19,100	1.24	9	15	17.49	4  5/8	2 11/16	0.420	0.268	4
			25.800	324,100	0.380	3.240	4.322	3.578	7.157	12,469	12,896	H90	5 1/2	2 13/16	35,400	913,700	20,400	1.37	9	12	17.67	4  31/32	2 11/16	0.420	0.270	4
			25.800	324,100	0.380	3.240	4.322	3.578	7.157	12,469	12,896	XT39	4 7/8	2 9/16	37,000	729,700	22,200	1.43	10	15	17.24	4  5/32	2 7/16	0.415	0.264	4
			25.800	324,100	0.380	3.240	4.322	3.578	7.157	12,469	12,896	XT40	5 1/4	2 13/16	44,000	751,600	26,400	1.71	10	15	17.59	4  5/16	2 11/16	0.420	0.269	4
4	15.70	G-105 UE	36.100	453,800	0.380	3.240	4.322	3.578	7.157	17,456	18,055	NC46	6	3	39,200	1,048,400	20,500	1.09	9	12	18.49	5  15/32	2 7/8	0.424	0.283	4
4	15.70	G-105 UI	36.100	453,800	0.380	3.240	4.322	3.578	7.157	17,456	18,055	NC40	5 1/2	2 7/16	30,100	897,200	15,600	0.83	9	12	18.20	5  1/16	2 5/16	0.414	0.278	4
			36.100	453,800	0.380	3.240	4.322	3.578	7.157	17,456	18,055	HT40	5 1/4	2 13/16	31,900	711,600	19,100	0.88	9	15	17.49	4  27/32	2 11/16	0.420	0.268	4
			36.100	453,800	0.380	3.240	4.322	3.578	7.157	17,456	18,055	H90	5 1/2	2 13/16	35,400	913,700	20,400	0.98	9	15	18.00	5  5/32	2 11/16	0.420	0.275	4
			36.100	453,800	0.380	3.240	4.322	3.578	7.157	17,456	18,055	XT39	4 7/8	2 9/16	37,000	729,700	22,200	1.02	10	15	17.24	4  13/32	2 7/16	0.415	0.264	4
			36.100	453,800	0.380	3.240	4.322	3.578	7.157	17,456	18,055	XT40	5 1/4	2 13/16	44,000	751,600	26,400	1.22	10	15	17.59	4  17/32	2 11/16	0.420	0.269	4
4	15.70	S-135 UE	46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	NC46	6	3	39,200	1,048,400	20,500	0.84	9	12	18.49	5 21/32	2 7/8	0.424	0.283	4
4	15.70	S-135 IU	46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	NC40	5 1/2	2	36,400	1,080,100	18,900	0.78	9	12	18.73	5  1/4	1 7/8	0.409	0.286	4
			46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	HT40	5 1/4	2 9/16	39,500	838,300	23,700	0.85	9	15	17.88	4 15/16	2 7/16	0.415	0.273	4
			46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	H90	5 3/4	2 11/16	38,400	978,500	21,800	0.83	9	15	18.74	5 5/16	2 9/16	0.417	0.287	4
			46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	XT39	4 7/8	2 9/16	37,000	729,700	22,200	0.80	10	15	17.24	4 5/8	2 7/16	0.415	0.264	4
			46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	XT40	5 1/4	2 13/16	44,000	751,600	26,400	0.95	10	15	17.59	4 3/4	2 11/16	0.420	0.269	4
			46.500	583.400	0.380	3.240	4.322	3.578	7.157	22,444	23,213	GPDS40	5 1/4	2 9/16	36,400	838,300	21,800	0.78	9	12	17.57	5 1/32	2 7/16	0.417	0.269	4
4	15.70	V-150 UI	51.600	648,200	0.380	3.240	4.322	3.578	7.157	24,938	25,793	HT40	5 1/4	2 7/16	41,000	897,200	24,600	0.79	9	15	18.05	5	2 5/16	0.413	0.276	4
			51.600	648,200	0.380	3.240	4.322	3.578	7.157	24,938	25,793	XT39	4 7/8	2 9/16	37,000	729,700	22,200	0.72	10	15	17.24	4 23/32	2 7/16	0.415	0.264	4
			51.600	648,200	0.380	3.240	4.322	3.578	7.157	24,938	25,793	XT40	5 1/4	2 11/16	48,100	816,400	28,900	0.93	10	15	17.79	4 25/32	2 9/16	0.417	0.272	4
			51.600	648,200	0.380	3.240	4.322	3.578	7.157	24,938	25,793	GPDS40	5 1/4	2 7/16	38,100	897,200	22,900	0.74	9	12	17.74	5 3/32	2 5/16	0.415	0.271	4
4	15.70	X-95 UE	32.700	410,500	0.380	3.240	4.322	3.578	7.157	15,794	16,335	NC46	6	3	39,200	1,048,400	20,500	1.20	9	12	18.49	5  7/16	2 7/8	0.424	0.283	4
4	15.70	X-95 UI	32.700	410,500	0.380	3.240	4.322	3.578	7.157	15,794	16,335	NC40	5 1/4	2 9/16	27,800	838,300	14,600	0.85	9	12	17.57	5	2 7/16	0.417	0.269	4
			32.700	410,500	0.380	3.240	4.322	3.578	7.157	15,794	16,335	HT40	5 1/4	2 13/16	31,900	711,600	19,100	0.98	9	15	17.49	4  25/32	2 11/16	0.420	0.268	4
			32.700	410,500	0.380	3.240	4.322	3.578	7.157	15,794	16,335	H90	5 1/2	2 13/16	35,400	913,700	20,400	1.08	9	12	17.67	5  3/32	2 11/16	0.420	0.270	4
			32.700	410,500	0.380	3.240	4.322	3.578	7.157	15,794	16,335	XT39	4 7/8	2 9/16	37,000	729,700	22,200	1.13	10	15	17.24	4  5/16	2 7/16	0.415	0.264	4
			32.700	410,500	0.380	3.240	4.322	3.578	7.157	15,794	16,335	XT40	5 1/4	2 13/16	44,000	751,600	26,400	1.35	10	15	17.59	4  15/32	2 11/16	0.420	0.269	4
4	15.70	Z-140 UI	48.200	605.000	0.380	3.240	4.322	3.578	7.157	23,275	24,073	HT40	5 1/4	2 9/16	39,500	838,300	23,700	0.82	9	15	17.88	4 31/32	2 7/16	0.415	0.273	4
			48.200	605.000	0.380	3.240	4.322	3.578	7.157	23,275	24,073	XT39	4 7/8	2 9/16	37,000	729,700	22,200	0.77	10	15	17.24	4 21/32	2 7/16	0.415	0.264	4
			48.200	605.000	0.380	3.240	4.322	3.578	7.157	23,275	24,073	XT40	5 1/4	2 13/16	44,000	751,600	26,400	0.91	10	15	17.59	4 25/32	2 11/16	0.420	0.269	4
			48.200	605.000	0.380	3.240	4.322	3.578	7.157	23,275	24,073	GPDS40	5 1/4	2 9/16	36,400	838,300	21,800	0.76	9	12	17.57	5 1/16	2 7/16	0.417	0.269	4

4.5′′ Especificaciones API de la tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Grado y UpsetType	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Internal Pressure	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
4 1/2	16.60	E-75 UE	30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	OH	5 7/8	3 3/4	27,300	714,000	14,600	0.89	9	12	17.58	5 15/32	3 5/8	0.596	0.269	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	NC50	6 5/8	3 3/4	38,100	939,100	19,800	1.24	9	12	19.19	5 23/32	3 5/8	0.595	0.294	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	HT50	6 1/4	3 3/4	52,700	939,100	31,600	1.71	9	15	18.73	5 13/16	3 5/8	0.595	0.287	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	XT50	6 3/8	3 3/4	75,200	1,085,500	45,100	2.44	10	15	19.17	5 31/32	3 5/8	0.595	0.293	4 1/2
4 1/2	16.60	E-75 IEU	30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	NC46	6 1/4	3 1/4	34,000	901,200	17,600	1.10	9	12	19.14	5 13/32	3 1/8	0.585	0.293	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	FH	6	3	34,800	976,200	17,600	1.13	9	12	19.03	5 3/8	2 7/8	0.580	0.291	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	H90	6	3 1/4	39,000	938,400	18,800	1.27	9	12	18.61	5 11/32	3 1/8	0.585	0.285	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	HT46	6 1/4	3 1/4	47,600	901,200	28,600	1.55	9	15	19.59	5 13/32	3 1/8	0.583	0.300	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	XT40	5 1/4	3	37,400	648,900	22,400	1.21	10	15	17.92	4 7/8	2 7/8	0.579	0.274	4 1/2
			30.800	330.600	0.337	3.826	4.407	4.271	8.543	9,829	10,392	XT46	6	3 1/2	58,100	910,300	34,900	1.89	10	15	18.63	5 5/8	3 3/8	0.589	0.285	4 1/2
4 1/2	16.60	G-105 UE	43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	OH	6	3 1/4	40,300	1,043,800	21,500	0.94	9	12	18.69	5 21/32	3 1/8	0.585	0.286	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	NC50	6 5/8	3 3/4	38,100	939,100	19,800	0.88	9	12	19.19	5 29/32	3 5/8	0.595	0.294	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	HT50	6 1/4	3 3/4	52,700	939,100	31,600	1.22	9	15	18.73	5 13/16	3 5/8	0.595	0.287	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	XT50	6 3/8	3 3/4	75,200	1,085,500	45,100	1.74	10	15	19.17	5 31/32	3 5/8	0.595	0.293	4 1/2
4 1/2	16.60	G-105 IEU	43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	NC46	6 1/4	3	39,700	1,048,400	20,500	0.92	9	12	19.57	5 19/32	2 7/8	0.580	0.299	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	FH	6 1/4	2 3/4	40,200	1,111,600	20,100	0.93	9	12	19.96	5 9/16	2 5/8	0.575	0.305	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	H90	6	3 1/4	39,000	938,400	18,800	0.90	9	12	18.61	5 17/32	3 1/8	0.585	0.285	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	HT46	6 1/4	3 1/4	47,600	901,200	28,600	1.10	9	15	19.59	5 13/32	3 1/8	0.583	0.300	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	XT40	5 1/4	3	37,400	648,900	22,400	0.87	10	15	17.92	4 7/8	2 7/8	0.579	0.274	4 1/2
			43.100	462,800	0.337	3.826	4.407	4.271	8.543	13,761	13,825	XT46	6	3 1/2	58,100	910,300	34,900	1.35	10	15	18.63	5 5/8	3 3/8	0.589	0.285	4 1/2
4 1/2	16.60	S-135 UE	55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	OH	6	3	43,400	1,191,100	24,600	0.78	9	12	19.07	5 13/16	2 7/8	0.581	0.292	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	NC50	6 5/8	3 1/2	45,100	1,109,900	23,400	0.81	9	12	19.65	6 1/16	3 3/8	0.590	0.301	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	HT50	6 3/8	3 1/2	65,700	1,109,900	39,400	1.18	9	15	19.52	5 13/16	3 3/8	0.589	0.299	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	XT50	6 3/8	3 3/4	75,200	1,085,500	45,100	1.35	10	15	19.17	5 31/32	3 5/8	0.595	0.293	4 1/2
4 1/2	16.60	S-135 IEU	55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	NC46	6 1/4	2 3/4	44,900	1,183,900	23,200	0.81	9	12	19.96	5 25/32	2 5/8	0.575	0.305	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	FH	6 1/4	2 3/4	40,200	1,111,600	20,100	0.72	9	12	19.96	5 3/4	2 5/8	0.575	0.305	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	H90	6 1/4	2 3/4	51,500	1,221,100	24,600	0.93	9	12	19.96	5 11/16	2 5/8	0.575	0.305	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	HT46	6 1/4	3 1/4	47,600	901,200	28,600	0.86	9	15	19.59	5 1/2	3 1/8	0.583	0.300	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	XT40	5 1/4	2 13/16	44,000	751,600	26,400	0.79	10	15	18.23	4 15/16	2 11/16	0.575	0.279	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	XT46	6	3 1/2	58,100	910,300	34,900	1.05	10	15	18.63	5 5/8	3 3/8	0.589	0.285	4 1/2
			55.500	595.000	0.337	3.826	4.407	4.271	8.543	17,693	16,773	GPDS46	6 1/4	3 1/4	43,300	901,200	26,000	0.78	9	12	19.14	5 19/32	3 1/8	0.585	0.293	4 1/2
4 1/2	16.60	V-150 UE	61.600	661,100	0.337	3.826	4.407	4.271	8.543	19,658	18,103	HT50	6 3/8	3 1/2	65,700	1,109,900	39,400	1.07	9	15	19.52	5 13/16	3 3/8	0.589	0.299	4 1/2
			61.600	661,100	0.337	3.826	4.407	4.271	8.543	19,658	18,103	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	1.32	10	15	19.67	5 31/32	3 3/8	0.589	0.301	4 1/2
4 1/2	16.60	V-150 IEU	61.600	661,100	0.337	3.826	4.407	4.271	8.543	19,658	18,103	HT46	6 1/4	3 1/4	47,600	901,200	28,600	0.77	9	15	19.59	5 19/32	3 1/8	0.583	0.300	4 1/2
			61.600	661,100	0.337	3.826	4.407	4.271	8.543	19,658	18,103	XT40	5 1/4	2 13/16	44,000	751,600	26,400	0.71	10	15	18.23	5 1/16	2 11/16	0.575	0.279	4 1/2
			61.600	661,100	0.337	3.826	4.407	4.271	8.543	19,658	18,103	XT46	6 1/4	3 1/4	70,200	1,069,300	42,100	1.14	10	15	19.74	5 5/8	3 1/8	0.583	0.302	4 1/2
			61.600	661,100	0.337	3.826	4.407	4.271	8.543	19,658	18,103	GPDS46	6 1/4	3 1/4	43,300	901,200	26,000	0.70	9	12	19.14	5 11/16	3 1/8	0.585	0.293	4 1/2
4 1/2	16.60	X-95 UE	39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	OH	5 7/8	3 1/2	33,900	884,800	18,200	0.87	9	12	18.02	5 19/32	3 3/8	0.590	0.276	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	NC50	6 5/8	3 3/4	38,100	939,100	19,800	0.98	9	12	19.19	5 27/32	3 5/8	0.595	0.294	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	HT50	6 1/4	3 3/4	52,700	939,100	31,600	1.35	9	15	18.73	5 13/16	3 5/8	0.595	0.287	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	XT50	6 3/8	3 3/4	75,200	1,085,500	45,100	1.93	10	15	19.17	5 31/32	3 5/8	0.595	0.293	4 1/2
4 1/2	16.60	X-95 IEU	39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	NC46	6 1/4	3 1/4	34,000	901,200	17,600	0.87	9	12	19.14	5 17/32	3 1/8	0.585	0.293	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	FH	6	3	34,800	976,200	17,600	0.89	9	12	19.03	5 1/2	2 7/8	0.580	0.291	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	H90	6	3 1/4	39,000	938,400	18,800	1.00	9	12	18.61	5 15/32	3 1/8	0.585	0.285	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	HT46	6 1/4	3 1/4	47,600	901,200	28,600	1.22	9	15	19.59	5 13/32	3 1/8	0.583	0.300	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	XT40	5 1/4	3	37,400	648,900	22,400	0.96	10	15	17.92	4 7/8	2 7/8	0.579	0.274	4 1/2
			39.000	418.700	0.337	3.826	4.407	4.271	8.543	12,450	12,765	XT46	6	3 1/2	58,100	910,300	34,900	1.49	10	15	18.63	5 5/8	3 3/8	0.589	0.285	4 1/2
4 1/2	16.60	Z-140 UE	57.500	617.000	0.337	3.826	4.407	4.271	8.543	18,348	17,228	HT50	6 3/8	3 1/2	65,700	1,109,900	39,400	1.14	9	15	19.52	5 13/16	3 3/8	0.589	0.299	4 1/2
			57.500	617.000	0.337	3.826	4.407	4.271	8.543	18,348	17,228	XT50	6 3/8	3 3/4	75,200	1,085,500	45,100	1.31	10	15	19.17	5 31/32	3 5/8	0.595	0.293	4 1/2
4 1/2	16.60	Z-140 IEU	57.500	617.000	0.337	3.826	4.407	4.271	8.543	18,348	17,228	HT46	6 1/4	3 1/4	47,600	901,200	28,600	0.83	9	15	19.59	5 17/32	3 1/8	0.583	0.300	4 1/2
			57.500	617.000	0.337	3.826	4.407	4.271	8.543	18,348	17,228	XT40	5 1/4	2 13/16	44,000	751,600	26,400	0.77	10	15	18.23	4 31/32	2 11/16	0.575	0.279	4 1/2
			57.500	617.000	0.337	3.826	4.407	4.271	8.543	18,348	17,228	XT46	6	3 1/2	58,100	910,300	34,900	1.01	10	15	18.63	5 5/8	3 3/8	0.589	0.285	4 1/2
			57.500	617.000	0.337	3.826	4.407	4.271	8.543	18,348	17,228	GPDS46	6 1/4	3 1/4	43,300	901,200	26,000	0.75	9	12	19.14	5 5/8	3 1/8	0.585	0.293	4 1/2
4 1/2	20.00	E-75 UE	36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	OH	6	3 1/2	34,100	884,800	18,200	0.92	9	12	21.64	5 17/32	3 3/8	0.538	0.331	4 1/2
			36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	NC50	6 5/8	3 5/8	41,700	1,026,000	21,600	1.13	9	12	22.77	5 13/16	3 1/2	0.540	0.348	4 1/2
			36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	HT50	6 1/4	3 5/8	59,200	1,026,000	35,500	1.60	9	15	22.31	5 13/16	3 1/2	0.540	0.341	4 1/2
			36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	2.20	10	15	22.99	5 31/32	3 3/8	0.537	0.352	4 1/2
4 1/2	20.00	E-75 IEU	36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	NC46	6 1/4	3	39,700	1,048,400	20,500	1.08	9	12	22.89	5 1/2	2 7/8	0.527	0.350	4 1/2
			36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	H90	6	3 1/4	39,000	938,400	18,800	1.06	9	12	21.94	5 7/16	3 1/8	0.532	0.336	4 1/2
			36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	HT46	6 1/4	3 1/4	47,600	901,200	28,600	1.29	9	15	22.89	5 13/32	3 1/8	0.531	0.350	4 1/2
			36.900	412.400	0.430	3.640	5.498	5.116	10.232	12,542	12,964	XT46	6	3 1/2	58,100	910,300	34,900	1.57	10	15	21.93	5 5/8	3 3/8	0.537	0.335	4 1/2
4 1/2	20.00	G-105 UE	51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	OH	6 1/4	3	46,600	1,191,100	24,600	0.90	9	12	22.97	5 3/4	2 7/8	0.528	0.351	4 1/2
			51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	NC50	6 5/8	3 1/2	45,100	1,109,900	23,400	0.87	9	12	23.00	6 1/32	3 3/8	0.538	0.352	4 1/2
			51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	HT50	6 1/4	3 1/2	62,700	1,109,900	37,600	1.21	9	15	22.55	5 13/16	3 3/8	0.537	0.345	4 1/2
			51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	1.57	10	15	22.99	5 31/32	3 3/8	0.537	0.352	4 1/2
4 1/2	20.00	G-105 IEU	51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	NC46	6 1/4	2 3/4	44,900	1,183,900	23,200	0.87	9	12	23.28	5 23/32	2 5/8	0.523	0.356	4 1/2
			51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	H90	6 1/4	3	45,700	1,085,700	21,800	0.88	9	12	22.89	5 5/8	2 7/8	0.527	0.350	4 1/2
			51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	HT46	6 1/4	3 1/4	47,600	901,200	28,600	0.92	9	15	22.89	5 7/16	3 1/8	0.531	0.350	4 1/2
			51.700	577,300	0.430	3.640	5.498	5.116	10.232	17,558	18,149	XT46	6	3 1/2	58,100	910,300	34,900	1.12	10	15	21.93	5 5/8	3 3/8	0.537	0.335	4 1/2
4 1/2	20.00	S-135 UE	66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	OH	6 3/8	2 3/4	52,200	1,326,600	27,400	0.79	9	12	23.61	5 31/32	2 5/8	0.524	0.361	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	NC50	6 5/8	3 1/4	51,700	1,269,000	26,800	0.78	9	12	23.43	6 7/32	3 1/8	0.532	0.358	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	HT50	6 3/8	3 1/2	65,700	1,109,900	39,400	0.99	9	15	22.85	5 13/16	3 3/8	0.537	0.350	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	1.22	10	15	22.99	5 31/32	3 3/8	0.537	0.352	4 1/2
4 1/2	20.00	S-135 IEU	66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	NC46	6 1/4	2 3/4	44,900	1,183,900	23,200	0.68	9	12	23.28	5 15/16	2 5/8	0.523	0.356	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	H90	6 3/8	2 3/4	51,700	1,221,100	24,600	0.78	9	12	23.57	5 27/32	2 5/8	0.523	0.360	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	HT46	6 1/4	3	57,700	1,048,400	34,600	0.87	9	15	23.34	5 9/16	2 7/8	0.526	0.357	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	XT46	6	3 1/4	64,800	1,069,300	38,900	0.98	10	15	22.42	5 5/8	3 1/8	0.531	0.343	4 1/2
			66.400	742.200	0.430	3.640	5.498	5.116	10.232	22,575	23,335	GPDS46	6 1/4	3	53,400	1,048,400	32,000	0.80	9	12	22.89	5 21/32	2 7/8	0.527	0.350	4 1/2
4 1/2	20.00	V-150 UE	73.800	824.700	0.430	3.640	5.498	5.116	10.232	25,083	25,927	HT50	6 3/8	3 1/2	65,700	1,109,900	39,400	0.89	9	15	22.85	5 29/32	3 3/8	0.537	0.350	4 1/2
			73.800	824.700	0.430	3.640	5.498	5.116	10.232	25,083	25,927	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	1.10	10	15	22.99	5 31/32	3 3/8	0.537	0.352	4 1/2
4 1/2	20.00	V-150 IEU	73.800	824.700	0.430	3.640	5.498	5.116	10.232	25,083	25,927	HT46	6 1/4	3	57,700	1,048,400	34,600	0.78	9	15	23.34	5 21/32	2 7/8	0.526	0.357	4 1/2
			73.800	824.700	0.430	3.640	5.498	5.116	10.232	25,083	25,927	XT46	6 1/4	3 1/8	75,700	1,144,400	45,400	1.03	10	15	23.26	5 5/8	3	0.528	0.356	4 1/2
			73.800	824.700	0.430	3.640	5.498	5.116	10.232	25,083	25,927	GPDS46	6 1/4	3	53,400	1,048,400	32,000	0.72	9	12	22.89	5 3/4	2 7/8	0.527	0.350	4 1/2
4 1/2	20.00	X-95 UE	46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	OH	6 1/4	3 1/4	40,700	1,043,800	21,500	0.87	9	12	22.58	5 11/16	3 1/8	0.533	0.345	4 1/2
			46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	NC50	6 5/8	3 1/2	45,100	1,109,900	23,400	0.97	9	12	23.00	5 15/16	3 3/8	0.538	0.352	4 1/2
			46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	HT50	6 1/4	3 1/2	62,700	1,109,900	37,600	1.34	9	15	22.55	5 13/16	3 3/8	0.537	0.345	4 1/2
			46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	1.74	10	15	22.99	5 31/32	3 3/8	0.537	0.352	4 1/2
4 1/2	20.00	X-95 IEU	46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	NC46	6 1/4	3	39,700	1,048,400	20,500	0.85	9	12	22.89	5 21/32	2 7/8	0.527	0.350	4 1/2
			46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	H90	6	3 1/4	39,000	938,400	18,800	0.84	9	12	21.94	5 9/16	3 1/8	0.532	0.336	4 1/2
			46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	HT46	6 1/4	3 1/4	47,600	901,200	28,600	1.02	9	15	22.89	5 13/32	3 1/8	0.531	0.350	4 1/2
			46.700	522.300	0.430	3.640	5.498	5.116	10.232	15,886	16,421	XT46	6	3 1/2	58,100	910,300	34,900	1.24	10	15	21.93	5 5/8	3 3/8	0.537	0.335	4 1/2
4 1/2	20.00	Z-140 UE	68.900	769.700	0.430	3.640	5.498	5.116	10.232	23,411	24,199	HT50	6 3/8	3 1/2	65,700	1,109,900	39,400	0.95	9	15	22.85	5 27/32	3 3/8	0.537	0.350	4 1/2
			68.900	769.700	0.430	3.640	5.498	5.116	10.232	23,411	24,199	XT50	6 3/8	3 1/2	81,200	1,256,300	48,700	1.18	10	15	22.99	5 31/32	3 3/8	0.537	0.352	4 1/2
4 1/2	20.00	Z-140 IEU	68.900	769.700	0.430	3.640	5.498	5.116	10.232	23,411	24,199	HT46	6 1/4	3	57,700	1,048,400	34,600	0.84	9	15	23.34	5 19/32	2 7/8	0.526	0.357	4 1/2
			68.900	769.700	0.430	3.640	5.498	5.116	10.232	23,411	24,199	XT46	6	3 1/4	64,800	1,069,300	38,900	0.94	10	15	22.42	5 5/8	3 1/8	0.531	0.343	4 1/2
			68.900	769.700	0.430	3.640	5.498	5.116	10.232	23,411	24,199	GPDS46	6 1/4	3	53,400	1,048,400	32,000	0.78	9	12	22.89	5 11/16	2 7/8	0.527	0.350	4 1/2

5′′ Especificaciones de la API de la tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Tipo de grado y malestar	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Presión Interna	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
5	19.50	E-75 IEU	41.200	395.600	0.362	4.276	5.275	5.708	11.415	9.503	9,962	NC50	6 5/8	3 3/4	38,100	939,100	19,800	0.92	9	12	22.12	5 7/8	3 5/8	0.733	0.338	5
			41.200	395.600	0.362	4.276	5.275	5.708	11.415	9.503	9,962	HT50	6 5/8	3 3/4	53,300	939,100	32,000	1.29	9	15	22.57	5 13/16	3 5/8	0.732	0.345	5
			41.200	395.600	0.362	4.276	5.275	5.708	11.415	9.503	9,962	FH	7	3 3/4	62,900	1,448,400	33,400	1.53	10	12	23.20	6 3/8	3 5/8	0.732	0.355	5
			41.200	395.600	0.362	4.276	5.275	5.708	11.415	9.503	9,962	XT46	6	3 1/2	36,500	910,300	21,900	0.89	10	15	21.69	5 5/8	3 3/8	0.726	0.332	5
			41.200	395.600	0.362	4.276	5.275	5.708	11.415	9.503	9,962	XT50	6 1/2	4	38,700	902,900	23,200	0.94	10	15	21.83	5 31/32	3 7/8	0.738	0.334	5
5	19,5	G-105 IEU	57.600	553,800	0.362	4.276	5.275	5.708	11.415	13.304	12,999	NC50	6 5/8	3 1/4	51,700	1,269,000	26,800	0.90	9	12	23.07	6 3/32	3 1/8	0.722	0.353	5
			57.600	553,800	0.362	4.276	5.275	5.708	11.415	13.304	12,999	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	1.15	9	15	23.10	5 13/16	3 3/8	0.726	0.353	5
			57.600	553,800	0.362	4.276	5.275	5.708	11.415	13.304	12,999	FH	7	3 3/4	62,900	1,448,400	33,400	1.09	10	12	23.20	6 9/16	3 5/8	0.732	0.355	5
			57.600	553,800	0.362	4.276	5.275	5.708	11.415	13.304	12,999	XT46	6	3 1/2	58,100	910,300	34,900	1.01	10	15	21.69	5 5/8	3 3/8	0.726	0.332	5
			57.600	553,800	0.362	4.276	5.275	5.708	11.415	13.304	12,999	XT50	6 1/2	4	62,500	902,900	37,500	1.09	10	15	21.83	5 31/32	3 7/8	0.738	0.334	5
			57.600	553,800	0.362	4.276	5.275	5.708	11.415	13.304	12,999	GPDS50	6 5/8	3 1/2	60,400	1,110,200	36,200	1.05	9	12	22.61	5 13/16	3 3/8	0.727	0.346	5
5	19,5	S-135 IEU	74.100	712,100	0.362	4.276	5.275	5.708	11.415	17,105	15,672	NC50	6 5/8	2 3/4	63,400	1,551,700	32,900	0.86	9	12	23.89	6 5/16	2 5/8	0.713	0.365	5
			74.100	712,100	0.362	4.276	5.275	5.708	11.415	17,105	15,672	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	0.89	9	15	23.10	5 15/16	3 3/8	0.726	0.353	5
			74.100	712,100	0.362	4.276	5.275	5.708	11.415	17,105	15,672	FH	7 1/4	3 1/2	72,500	1,619,200	37,400	0.98	10	12	24.38	6 3/4	3 3/8	0.726	0.373	5
			74.100	712,100	0.362	4.276	5.275	5.708	11.415	17,105	15,672	XT46	6	3 1/2	58,100	910,300	34,900	0.78	10	15	21.69	5 23/32	3 3/8	0.726	0.332	5
			74.100	712,100	0.362	4.276	5.275	5.708	11.415	17,105	15,672	XT50	6 1/2	3 3/4	77,000	1,085,500	46,200	1.04	10	15	22.39	5 31/32	3 5/8	0.731	0.343	5
			74.100	712,100	0.362	4.276	5.275	5.708	11.415	17,105	15,672	GPDS50	6 5/8	3 1/2	60,400	1,110,200	36,200	0.82	9	12	22.61	6 1/32	3 3/8	0.727	0.346	5
5	19,5	V-150 IEU	82.300	791.200	0.362	4.276	5.275	5.708	11.415	19.005	16,858	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	0.80	9	15	23.10	6 1/32	3 3/8	0.726	0.353	5
			82.300	791.200	0.362	4.276	5.275	5.708	11.415	19.005	16,858	XT46	6 1/4	3 1/4	70,200	1,069,300	42,100	0.85	10	15	22.78	5 23/32	3 1/8	0.720	0.348	5
			82.300	791.200	0.362	4.276	5.275	5.708	11.415	19.005	16,858	XT50	6 1/2	3 3/4	77,000	1,085,500	46,200	0.94	10	15	22.39	5 31/32	3 5/8	0.731	0.343	5
			82.300	791.200	0.362	4.276	5.275	5.708	11.415	19.005	16,858	GPDS50	6 5/8	3 1/2	60,400	1,110,200	36,200	0.73	9	12	22.61	6 5/32	3 3/8	0.727	0.346	5
5	19,5	X-95 IEU	52.100	501,100	0.362	4.276	5.275	5.708	11.415	12.037	12,026	NC50	6 5/8	3 1/2	45,100	1,109,900	23,400	0.87	9	12	22.61	6 1/32	3 3/8	0.727	0.346	5
			52.100	501,100	0.362	4.276	5.275	5.708	11.415	12.037	12,026	HT50	6 5/8	3 3/4	53,300	939,100	32,000	1.02	9	15	22.57	5 13/16	3 5/8	0.732	0.345	5
			52.100	501,100	0.362	4.276	5.275	5.708	11.415	12.037	12,026	FH	7	3 3/4	62,900	1,448,400	33,400	1.21	10	12	23.20	6 1/2	3 5/8	0.732	0.355	5
			52.100	501,100	0.362	4.276	5.275	5.708	11.415	12.037	12,026	XT46	6	3 1/2	58,100	910,300	34,900	1.12	10	15	21.69	5 5/8	3 3/8	0.726	0.332	5
			52.100	501,100	0.362	4.276	5.275	5.708	11.415	12.037	12,026	XT50	6 1/2	4	62,500	902,900	37,500	1.20	10	15	21.83	5 31/32	3 7/8	0.738	0.334	5
5	19,5	Z-140 IEU	76.800	738.400	0.362	4.276	5.275	5.708	11.415	17.738	16,079	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	0.86	9	15	23.10	5 31/32	3 3/8	0.726	0.353	5
			76.800	738.400	0.362	4.276	5.275	5.708	11.415	17.738	16,079	XT46	6	3 1/2	58,100	910,300	34,900	0.76	10	15	21.69	5 25/32	3 3/8	0.726	0.332	5
			76.800	738.400	0.362	4.276	5.275	5.708	11.415	17.738	16,079	XT50	6 1/2	3 3/4	77,000	1,085,500	46,200	1.00	10	15	22.39	5 31/32	3 5/8	0.731	0.343	5
			76.800	738.400	0.362	4.276	5.275	5.708	11.415	17.738	16,079	GPDS50	6 5/8	3 1/2	60,400	1,110,200	36,200	0.79	9	12	22.61	6 3/32	3 3/8	0.727	0.346	5
5	25.60	E-75 IEU	52.300	530,100	0.500	4.000	7.069	7.245	14.491	13.125	13,500	NC50	6 5/8	3 1/2	45,100	1,109,900	23,400	0.86	9	12	28.08	6 1/32	3 3/8	0.641	0.430	5
			52.300	530,100	0.500	4.000	7.069	7.245	14.491	13.125	13,500	HT50	6 5/8	3 3/4	53,300	939,100	32,000	1.02	9	15	28.01	5 13/16	3 5/8	0.646	0.428	5
			52.300	530,100	0.500	4.000	7.069	7.245	14.491	13.125	13,500	FH	7	3 1/2	62,900	1,619,200	37,400	1.20	10	12	29.16	6 1/2	3 3/8	0.641	0.446	5
			52.300	530,100	0.500	4.000	7.069	7.245	14.491	13.125	13,500	XT50	6 5/8	3 3/4	77,300	1,085,500	46,400	1.48	10	15	28.14	5 31/32	3 5/8	0.646	0.430	5
5	25.6	G-105 IEU	73.200	742.200	0.500	4.000	7.069	7.245	14.491	18,375	18,900	NC50	6 5/8	2 3/4	63,400	1,551,700	32,900	0.87	9	12	29.36	6 9/32	2 5/8	0.627	0.449	5
			73.200	742.200	0.500	4.000	7.069	7.245	14.491	18,375	18,900	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	0.90	9	15	28.53	5 29/32	3 3/8	0.640	0.436	5
			73.200	742.200	0.500	4.000	7.069	7.245	14.491	18,375	18,900	FH	7 1/4	3 1/2	72,500	1,619,200	37,400	0.99	10	12	29.82	6 23/32	3 3/8	0.640	0.456	5
			73.200	742.200	0.500	4.000	7.069	7.245	14.491	18,375	18,900	XT50	6 5/8	3 3/4	77,300	1,085,500	46,400	1.06	10	15	28.14	5 31/32	3 5/8	0.646	0.430	5
			73.200	742.200	0.500	4.000	7.069	7.245	14.491	18,375	18,900	GPDS50	6 5/8	3 1/2	60,400	1,110,200	36,200	0.83	9	12	28.08	6 1/32	3 3/8	0.641	0.430	5
5	25.6	S-135 IEU	94.100	954,300	0.500	4.000	7.069	7.245	14.491	23.625	24,300	NC50	6 5/8	2 3/4	63,400	1,551,700	32,900	0.67	9	12	29.36	6 17/32	2 5/8	0.627	0.449	5
			94.100	954,300	0.500	4.000	7.069	7.245	14.491	23.625	24,300	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	0.70	9	15	28.53	6 3/16	3 3/8	0.640	0.436	5
			94.100	954,300	0.500	4.000	7.069	7.245	14.491	23.625	24,300	FH	7 1/4	3 1/4	78,700	1,778,300	41,200	0.84	10	12	30.30	6 15/16	3 1/8	0.635	0.464	5
			94.100	954,300	0.500	4.000	7.069	7.245	14.491	23.625	24,300	XT50	6 5/8	3 1/2	90,700	1,256,300	54,400	0.96	10	15	28.67	5 31/32	3 3/8	0.640	0.439	5
			94.100	954,300	0.500	4.000	7.069	7.245	14.491	23.625	24,300	GPDS50	6 5/8	3 1/2	60,400	1,110,200	36,200	0.64	9	12	28.08	6 9/32	3 3/8	0.641	0.430	5
5	25.6	V-150 IEU	104.500	1.060.300	0.500	4.000	7.069	7.245	14.491	26.250	27,000	HT50	6 5/8	3 1/4	78,000	1,269,000	46,800	0.75	9	15	29.02	6 7/32	3 1/8	0.634	0.444	5
			104.500	1.060.300	0.500	4.000	7.069	7.245	14.491	26.250	27,000	XT50	6 5/8	3 3/8	97,000	1,337,300	58,200	0.93	10	15	28.93	6 1/32	3 1/4	0.637	0.443	5
			104.500	1.060.300	0.500	4.000	7.069	7.245	14.491	26.250	27,000	GPDS50	6 5/8	3 1/4	72,200	1,269,200	43,300	0.69	9	12	28.54	6 5/16	3 1/8	0.636	0.437	5
5	25.6	X-95 IEU	66.200	671.500	0.500	4.000	7.069	7.245	14.491	16.625	17,100	NC50	6 5/8	3	57,800	1,416,200	30,000	0.87	9	12	28.97	6 7/32	2 7/8	0.631	0.443	5
			66.200	671.500	0.500	4.000	7.069	7.245	14.491	16.625	17,100	HT50	6 5/8	3 1/2	66,200	1,109,900	39,700	1.00	9	15	28.53	5 13/16	3 3/8	0.640	0.436	5
			66.200	671.500	0.500	4.000	7.069	7.245	14.491	16.625	17,100	FH	7	3 1/2	62,900	1,619,200	37,400	0.95	10	12	29.16	6 21/32	3 3/8	0.641	0.446	5
			66.200	671.500	0.500	4.000	7.069	7.245	14.491	16.625	17,100	XT50	6 5/8	3 3/4	77,300	1,085,500	46,400	1.17	10	15	28.14	5 31/32	3 5/8	0.646	0.430	5
5	25.6	Z-140 IEU	97.500	989.600	0.500	4.000	7.069	7.245	14.491	24.500	25,200	HT50	6 5/8	3 1/4	78,000	1,269,000	46,800	0.80	9	15	29.02	6 1/8	3 1/8	0.634	0.444	5
			97.500	989.600	0.500	4.000	7.069	7.245	14.491	24.500	25,200	XT50	6 5/8	3 1/2	90,700	1,256,300	54,400	0.93	10	15	28.67	6	3 3/8	0.640	0.439	5
			97.500	989.600	0.500	4.000	7.069	7.245	14.491	24.500	25,200	GPDS50	6 5/8	3 1/4	72,200	1,269,200	43,300	0.74	9	12	28.54	6 7/32	3 1/8	0.636	0.437	5

5.5′′ API Perforación de tuberías Especificaciones

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Tipo de grado y malestar	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Presión Interna	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
5 1/2	21.90	E-75 IEU	50.700	437.100	0.361	4.778	5.828	7.031	14.062	8,615	8,413	FH	7	4	57,900	1,265,800	31,200	1.14	10	12	24.83	6 15/32	3 7/8	0.910	0.380	5 1/2
			50.700	437.100	0.361	4.778	5.828	7.031	14.062	8,615	8,413	HT55	7	4	77,200	1,265,800	46,300	1.52	10	15	25.32	6 13/32	3 7/8	0.908	0.387	5 1/2
			50.700	437.100	0.361	4.778	5.828	7.031	14.062	8,615	8,413	XT54	6 3/4	4 1/4	70,400	960,700	42,200	1.39	10	15	24.04	6 7/32	4 1/8	0.915	0.368	5 1/2
			50.700	437.100	0.361	4.778	5.828	7.031	14.062	8,615	8,413	XT57	7	4 1/4	94,300	1,208,700	56,600	1.86	10	15	24.72	6 15/32	4 1/8	0.915	0.378	5 1/2
5 1/2	21.90	G-105 IEU	71,000	612.000	0.361	4.778	5.828	7.031	14.062	12,061	10,753	FH	7 1/4	3 1/2	75,000	1,619,200	40,000	1.06	10	12	26.62	6 11/16	3 3/8	0.898	0.407	5 1/2
			71,000	612.000	0.361	4.778	5.828	7.031	14.062	12,061	10,753	HT55	7	4	77,200	1,265,800	46,300	1.09	10	15	25.42	6 13/32	3 7/8	0.908	0.389	5 1/2
			71,000	612.000	0.361	4.778	5.828	7.031	14.062	12,061	10,753	XT54	6 3/4	4 1/4	70,400	960,700	42,200	0.99	10	15	24.04	6 7/32	4 1/8	0.915	0.368	5 1/2
			71,000	612.000	0.361	4.778	5.828	7.031	14.062	12,061	10,753	XT57	7	4 1/4	94,300	1,208,700	56,600	1.33	10	15	24.72	6 15/32	4 1/8	0.915	0.378	5 1/2
			71,000	612.000	0.361	4.778	5.828	7.031	14.062	12,061	10,753	GPDS55	7	4	74,200	1,292,500	44,500	1.05	10	12	24.83	6 7/16	3 7/8	0.910	0.380	5 1/2
5 1/2	21.90	S-135 IEU	91.300	786.800	0.361	4.778	5.828	7.031	14.062	15,507	12,679	FH	7 1/2	3	90,200	1,925,500	47,700	0.99	10	12	28.24	6 29/32	2 7/8	0.886	0.432	5 1/2
			91.300	786.800	0.361	4.778	5.828	7.031	14.062	15,507	12,679	HT55	7	4	77,200	1,265,800	46,300	0.85	10	15	25.42	6 5/8	3 7/8	0.908	0.389	5 1/2
			91.300	786.800	0.361	4.778	5.828	7.031	14.062	15,507	12,679	XT54	6 3/4	4 1/4	70,400	960,700	42,200	0.77	10	15	24.04	6 5/16	4 1/8	0.915	0.368	5 1/2
			91.300	786.800	0.361	4.778	5.828	7.031	14.062	15,507	12,679	XT57	7	4 1/4	94,300	1,208,700	56,600	1.03	10	15	24.72	6 15/32	4 1/8	0.915	0.378	5 1/2
			91.300	786.800	0.361	4.778	5.828	7.031	14.062	15,507	12,679	GPDS55	7	4	74,200	1,292,500	44,500	0.81	10	12	24.83	6 11/16	3 7/8	0.910	0.380	5 1/2
5 1/2	21.90	V-150 IEU	101.400	874.200	0.361	4.778	5.828	7.031	14.062	17,230	13,473	FH	7 1/2	3	90,200	1,925,500	47,700	0.89	10	12	28.24	7	2 7/8	0.886	0.432	5 1/2
			101.400	874.200	0.361	4.778	5.828	7.031	14.062	17,230	13,473	HT55	7	4	77,200	1,265,800	46,300	0.76	10	15	25.42	6 23/32	3 7/8	0.908	0.389	5 1/2
			101.400	874.200	0.361	4.778	5.828	7.031	14.062	17,230	13,473	XT54	6 3/4	4	86,600	1,155,100	52,000	0.85	10	15	24.63	6 9/32	3 7/8	0.908	0.377	5 1/2
			101.400	874.200	0.361	4.778	5.828	7.031	14.062	17,230	13,473	XT57	7	4 1/4	94,300	1,208,700	56,600	0.93	10	15	24.72	6 15/32	4 1/8	0.915	0.378	5 1/2
			101.400	874.200	0.361	4.778	5.828	7.031	14.062	17,230	13,473	GPDS55	7	4	74,200	1,292,500	44,500	0.73	10	12	24.83	6 25/32	3 7/8	0.910	0.380	5 1/2
5 1/2	21.90	X-95 IEU	64.200	553.700	0.361	4.778	5.828	7.031	14.062	10,912	10,019	FH	7	3 3/4	65,100	1,448,400	35,700	1.01	10	12	25.45	6 5/8	3 5/8	0.904	0.389	5 1/2
			64.200	553.700	0.361	4.778	5.828	7.031	14.062	10,912	10,019	HT55	7	4	77,200	1,265,800	46,300	1.20	10	15	25.42	6 13/32	3 7/8	0.908	0.389	5 1/2
			64.200	553.700	0.361	4.778	5.828	7.031	14.062	10,912	10,019	XT54	6 3/4	4 1/4	70,400	960,700	42,200	1.10	10	15	24.04	6 7/32	4 1/8	0.915	0.368	5 1/2
			64.200	553.700	0.361	4.778	5.828	7.031	14.062	10,912	10,019	XT57	7	4 1/4	94,300	1,208,700	56,600	1.47	10	15	24.72	6 15/32	4 1/8	0.915	0.378	5 1/2
5 1/2	21.90	Z-140 IEU	94.700	816.000	0.361	4.778	5.828	7.031	14.062	16,081	12,957	FH	7 1/2	3	90,200	1,925,500	47,700	0.95	10	12	28.24	6 15/16	2 7/8	0.886	0.432	5 1/2
			94.700	816.000	0.361	4.778	5.828	7.031	14.062	16,081	12,957	HT55	7	4	77,200	1,265,800	46,300	0.82	10	15	25.42	6 21/32	3 7/8	0.908	0.389	5 1/2
			94.700	816.000	0.361	4.778	5.828	7.031	14.062	16,081	12,957	XT54	6 3/4	4 1/4	70,400	960,700	42,200	0.74	10	15	24.04	6 11/32	4 1/8	0.915	0.368	5 1/2
			94.700	816.000	0.361	4.778	5.828	7.031	14.062	16,081	12,957	XT57	7	4 1/4	94,300	1,208,700	56,600	1.00	10	15	24.72	6 15/32	4 1/8	0.915	0.378	5 1/2
			94.700	816.000	0.361	4.778	5.828	7.031	14.062	16,081	12,957	GPDS55	7	4	74,200	1,292,500	44,500	0.78	10	12	24.83	6 23/32	3 7/8	0.910	0.380	5 1/2
5 1/2	24.70	E-75 IEU	56.600	497.200	0.415	4.670	6.630	7.844	15.688	9,903	10,464	FH	7	4	57,900	1,265,800	31,200	1.02	10	12	27.37	6 17/32	3 7/8	0.872	0.419	5 1/2
			56.600	497.200	0.415	4.670	6.630	7.844	15.688	9,903	10,464	HT55	7	4	77,200	1,265,800	46,300	1.36	10	15	27.85	6 13/32	3 7/8	0.870	0.426	5 1/2
			56.600	497.200	0.415	4.670	6.630	7.844	15.688	9,903	10,464	XT54	6 3/4	4 1/4	70,400	960,700	42,200	1.24	10	15	26.46	6 7/32	4 1/8	0.877	0.405	5 1/2
			56.600	497.200	0.415	4.670	6.630	7.844	15.688	9,903	10,464	XT57	7	4 1/4	94,300	1,208,700	56,600	1.67	10	15	27.14	6 15/32	4 1/8	0.877	0.415	5 1/2
5 1/2	24.70	G-105 IEU	79.200	696.100	0.415	4.670	6.630	7.844	15.688	13,865	14,013	FH	7 1/4	3 1/2	75,000	1,619,200	40,000	0.95	10	12	29.07	6 25/32	3 3/8	0.859	0.445	5 1/2
			79.200	696.100	0.415	4.670	6.630	7.844	15.688	13,865	14,013	HT55	7	4	77,200	1,265,800	46,300	0.97	10	15	27.85	6 15/32	3 7/8	0.870	0.426	5 1/2
			79.200	696.100	0.415	4.670	6.630	7.844	15.688	13,865	14,013	XT54	6 3/4	4 1/4	70,400	960,700	42,200	0.89	10	15	26.57	6 7/32	4 1/8	0.877	0.406	5 1/2
			79.200	696.100	0.415	4.670	6.630	7.844	15.688	13,865	14,013	XT57	7	4 1/4	94,300	1,208,700	56,600	1.19	10	15	27.25	6 15/32	4 1/8	0.877	0.417	5 1/2
			79.200	696.100	0.415	4.670	6.630	7.844	15.688	13,865	14,013	GPDS55	7	4	74,200	1,292,500	44,500	0.94	10	12	27.27	6 17/32	3 7/8	0.872	0.417	5 1/2
5 1/2	24.70	S-135 IEU	101.800	895.000	0.415	4.670	6.630	7.844	15.688	17,826	17,023	FH	7 1/2	3	90,200	1,925,500	47,700	0.89	10	12	30.69	7	2 7/8	0.848	0.469	5 1/2
			101.800	895.000	0.415	4.670	6.630	7.844	15.688	17,826	17,023	HT55	7	4	77,200	1,265,800	46,300	0.76	10	15	27.85	6 23/32	3 7/8	0.870	0.426	5 1/2
			101.800	895.000	0.415	4.670	6.630	7.844	15.688	17,826	17,023	XT54	6 3/4	4	86,600	1,155,100	52,000	0.85	10	15	27.17	6 9/32	3 7/8	0.870	0.416	5 1/2
			101.800	895.000	0.415	4.670	6.630	7.844	15.688	17,826	17,023	XT57	7	4 1/4	94,300	1,208,700	56,600	0.93	10	15	27.25	6 15/32	4 1/8	0.877	0.417	5 1/2
			101.800	895.000	0.415	4.670	6.630	7.844	15.688	17,826	17,023	GPDS55	7	4	74,200	1,292,500	44,500	0.73	10	12	27.27	6 25/32	3 7/8	0.872	0.417	5 1/2
5 1/2	24.70	V-150 IEU	113.100	994,400	0.415	4.670	6.630	7.844	15.688	19,807	18,386	FH	7 1/2	3	90,200	1,925,500	47,700	0.80	10	12	30.69	7 3/32	2 7/8	0.848	0.469	5 1/2
			113.100	994,400	0.415	4.670	6.630	7.844	15.688	19,807	18,386	HT55	7	3 3/4	87,700	1,448,400	52,600	0.78	10	15	28.42	6 23/32	3 5/8	0.863	0.435	5 1/2
			113.100	994,400	0.415	4.670	6.630	7.844	15.688	19,807	18,386	XT54	6 3/4	4	86,600	1,155,100	52,000	0.77	10	15	27.17	6 7/16	3 7/8	0.870	0.416	5 1/2
			113.100	994,400	0.415	4.670	6.630	7.844	15.688	19,807	18,386	XT57	7	4	106,200	1,403,100	63,700	0.94	10	15	27.85	6 15/32	3 7/8	0.870	0.426	5 1/2
			113.100	994,400	0.415	4.670	6.630	7.844	15.688	19,807	18,386	GPDS55	7 1/8	4 1/8	66,600	1,196,700	40,000	0.59	10	12	27.31	6 31/32	4	0.875	0.418	5 1/2
5 1/2	24.70	X-95 IEU	71.700	629.800	0.415	4.670	6.630	7.844	15.688	12,544	12,933	FH	7 1/4	3 1/2	75,000	1,619,200	40,000	1.05	10	12	29.07	6 11/16	3 3/8	0.859	0.445	5 1/2
			71.700	629.800	0.415	4.670	6.630	7.844	15.688	12,544	12,933	HT55	7	4	77,200	1,265,800	46,300	1.08	10	15	27.85	6 13/32	3 7/8	0.870	0.426	5 1/2
			71.700	629.800	0.415	4.670	6.630	7.844	15.688	12,544	12,933	XT54	6 3/4	4 1/4	70,400	960,700	42,200	0.98	10	15	26.57	6 7/32	4 1/8	0.877	0.406	5 1/2
			71.700	629.800	0.415	4.670	6.630	7.844	15.688	12,544	12,933	XT57	7	4 1/4	94,300	1,208,700	56,600	1.32	10	15	27.25	6 15/32	4 1/8	0.877	0.417	5 1/2
5 1/2	24.70	Z-140 IEU	105.600	928,100	0.415	4.670	6.630	7.844	15.688	18,486	17,489	FH	7 1/2	3	90,200	1,925,500	47,700	0.85	10	12	30.69	7 1/32	2 7/8	0.848	0.469	5 1/2
			105.600	928,100	0.415	4.670	6.630	7.844	15.688	18,486	17,489	HT55	7	3 3/4	87,700	1,448,400	52,600	0.83	10	15	28.42	6 21/32	3 5/8	0.863	0.435	5 1/2
			105.600	928,100	0.415	4.670	6.630	7.844	15.688	18,486	17,489	XT54	6 3/4	4	86,600	1,155,100	52,000	0.82	10	15	27.17	6 11/32	3 7/8	0.870	0.416	5 1/2
			105.600	928,100	0.415	4.670	6.630	7.844	15.688	18,486	17,489	XT57	7	4 1/4	94,300	1,208,700	56,600	0.89	10	15	27.25	6 15/32	4 1/8	0.877	0.417	5 1/2
			105.600	928,100	0.415	4.670	6.630	7.844	15.688	18,486	17,489	GPDS55	7 1/8	3 3/4	89,300	1,475,100	53,600	0.85	10	12	28.12	6 23/32	3 5/8	0.865	0.430	5 1/2

5 7/8′′ Especificaciones de tubería de perforación

Datos de la tubería												Tool Joint Data									Assembly Data
Tamaño Exterior D	Peso nominal	Grado y UpsetType	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Internal Pressure	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Tensile Yield Strength	Make-up Torque	Torsional Ratio Tool Joint to Pipe	* Pin Tong Space	* Box Tong Space	Adjusted Weight	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Size Outer D
5 7/8	23.40	E-75 IEU	58.600	469,000	0.361	5.153	6.254	8.125	16.251	8,065	7,453	XT57	7	4 1/4	94,300	1,208,700	56,600	1.61	10	15	26.48	6 15/32	4 1/8	1.055	0.405	5 7/8
		G-105 IEU	82,000	656,600	0.361	5.153	6.254	8.125	16.251	11,291	9,362	XT57	7	4 1/4	94,300	1,208,700	56,600	1.15	10	15	26.48	6 15/32	4 1/8	1.055	0.405	5 7/8
		S-135 IEU	105.500	844.200	0.361	5.153	6.254	8.125	16.251	14,517	10,825	XT57	7	4 1/4	94,300	1,208,700	56,600	0.89	10	15	26.48	6 15/32	4 1/8	1.055	0.405	5 7/8
		V-150 IEU	117.200	938.000	0.361	5.153	6.254	8.125	16.251	16,130	11,376	XT57	7	4 1/4	94,300	1,208,700	56,600	0.80	10	15	26.48	6 5/8	4 1/8	1.055	0.405	5 7/8
		X-95 IEU	74,200	594,100	0.361	5.153	6.254	8.125	16.251	10,216	8,775	XT57	7	4 1/4	94,300	1,208,700	56,600	1.27	10	15	26.48	6 15/32	4 1/8	1.055	0.405	5 7/8
		Z-140 IEU	109,400	875,500	0.361	5.153	6.254	8.125	16.251	15,054	11,023	XT57	7	4 1/4	94,300	1,208,700	56,600	0.86	10	15	26.48	6 17/32	4 1/8	1.055	0.405	5 7/8
5 7/8	26.30	E-75 IEU	65.500	533,900	0.415	5.045	7.119	9.083	18.165	9,271	9,558	XT57	7	4 1/4	94,300	1,208,700	56,600	1.44	10	15	29.12	6 15/32	4 1/8	1.014	0.445	5 7/8
		G-105 IEU	91,700	747,400	0.415	5.045	7.119	9.083	18.165	12,980	12,414	XT57	7	4 1/4	94,300	1,208,700	56,600	1.03	10	15	29.12	6 15/32	4 1/8	1.014	0.445	5 7/8
		S-135 IEU	117.900	961.000	0.415	5.045	7.119	9.083	18.165	16,688	14,892	XT57	7	4 1/4	94,300	1,208,700	56,600	0.80	10	15	29.12	6 5/8	4 1/8	1.014	0.445	5 7/8
		V-150 IEU	131.000	1.067.800	0.415	5.045	7.119	9.083	18.165	18,543	15,976	XT57	7	4 1/4	94,300	1,208,700	56,600	0.72	10	15	29.12	6 3/4	4 1/8	1.014	0.445	5 7/8
		X-95 IEU	83.000	676.300	0.415	5.045	7.119	9.083	18.165	11,744	11,503	XT57	7	4 1/4	94,300	1,208,700	56,600	1.14	10	15	29.12	6 15/32	4 1/8	1.014	0.445	5 7/8
		Z-140 IEU	122.300	996,600	0.415	5.045	7.119	9.083	18.165	17,306	15,266	XT57	7	4 1/4	94,300	1,208,700	56,600	0.77	10	15	29.12	6 21/32	4 1/8	1.014	0.445	5 7/8

6 5/8′′ Especificaciones API de la tubería de perforación

Datos de la tubería												Datos Conjuntos de Herramientas									Datos de montaje
Tamaño Exterior D	Peso nominal	Grado y UpsetType	Fuerza de rendimiento torsional	Resistencia al rendimiento de la tracción	Espesor de pared	ID nominal	Sección del cuerpo de la tubería Zona	Módulo de sección de cuerpo de tubería	Sección polar del cuerpo de la tubería Módulo	Internal Pressure	Collapse Pressure	Connection Type	Outside Diameter	Inside Diameter	Torsional Yield Strength	Resistencia al rendimiento de la tracción	Maquillaje Torque	Junta de herramienta de relación torsional para Tubo	* Pin Tong Espacio	* Caja Tong Espacio	Peso Ajustado	Minimum Tool Joint O.D. for Prem. Class	Drift Diameter	Capacity	Displace- ment	Tamaño Exterior D
6 5/8	25.20	E-75 IEU	70,600	489,500	0.330	5.965	6.526	9.786	19.572	6,538	4,788	FH	8	5	73,700	1.448.400	38.400	1.04	10	13	28.79	7 7/16	4 7/8	1.418	0.440	6 5/8
			70,600	489,500	0.330	5.965	6.526	9.786	19.572	6,538	4,788	HT65	8	5	99,700	1.448.400	59.800	1.41	10	16	29.38	7 11/32	4 7/8	1.415	0.449	6 5/8
			70,600	489,500	0.330	5.965	6.526	9.786	19.572	6,538	4,788	XT65	8	5	135,300	1.543.700	81.200	1.92	10	15	29.18	7 11/32	4 7/8	1.416	0.446	6 5/8
6 5/8	25.20	G-105 IEU	98,800	685,200	0.330	5.965	6.526	9.786	19.572	9,153	5,500	FH	8 1/4	4 3/4	86,200	1.678.100	44.600	0,87	10	13	30.25	7 11/16	4 5/8	1.409	0,463	6 5/8
			98,800	685,200	0.330	5.965	6.526	9.786	19.572	9,153	5,500	HT65	8	5	99,700	1.448.400	59.800	1.01	10	16	29.38	7 13/32	4 7/8	1.415	0.449	6 5/8
			98,800	685,200	0.330	5.965	6.526	9.786	19.572	9,153	5,500	XT65	8	5	135,300	1.543.700	81.200	1.37	10	15	29.18	7 11/32	4 7/8	1.416	0.446	6 5/8
6 5/8	25.20	S-135 IEU	127.000	881,000	0.330	5.965	6.526	9.786	19.572	11,768	6,036	FH	8 1/2	4 1/4	109,200	2.102,300	56.100	0,86	10	13	32.36	7 29/32	4 1/8	1.394	0.495	6 5/8
			127.000	881,000	0.330	5.965	6.526	9.786	19.572	11,768	6,036	HT65	8	5	99,700	1.448.400	59.800	0,79	10	16	29.38	7 5/8	4 7/8	1.415	0.449	6 5/8
			127.000	881,000	0.330	5.965	6.526	9.786	19.572	11,768	6,036	XT65	8	5	135,300	1.543.700	81.200	1.07	10	15	29.18	7 11/32	4 7/8	1.416	0.446	6 5/8
			127.000	881,000	0.330	5.965	6.526	9.786	19.572	11,768	6,036	GPDS65	8	4 7/8	107,500	1.596.400	64.500	0,85	10	13	29.13	7 5/8	4 3/4	1.414	0.446	6 5/8
6 5/8	25.20	V-150 IEU	141.200	978.900	0.330	5.965	6.526	9.786	19.572	13,075	6,260	FH	8 1/2	4 1/4	109,200	2.102,300	56.100	0.77	10	13	32.36	8 1/32	4 1/8	1.394	0.495	6 5/8
			141.200	978.900	0.330	5.965	6.526	9.786	19.572	13,075	6,260	HT65	8	5	99,700	1.448.400	59.800	0,71	10	16	29.38	7 3/4	4 7/8	1.415	0.449	6 5/8
			141.200	978.900	0.330	5.965	6.526	9.786	19.572	13,075	6,260	XT65	8	5	135,300	1.543.700	81.200	0,96	10	15	29.18	7 11/32	4 7/8	1.416	0.446	6 5/8
			141.200	978.900	0.330	5.965	6.526	9.786	19.572	13,075	6,260	GPDS65	8 1/4	4 7/8	108,200	1.596.400	64.900	0.77	10	13	29.91	7 3/4	4 3/4	1.413	0.458	6 5/8
6 5/8	25.20	X-95 IEU	89.400	620.000	0.330	5.965	6.526	9.786	19.572	8,281	5,321	FH	8	5	73,700	1.448.400	38.400	0,82	10	13	28.79	7 5/8	4 7/8	1.418	0.440	6 5/8
			89.400	620.000	0.330	5.965	6.526	9.786	19.572	8,281	5,321	HT65	8	5	99,700	1.448.400	59.800	1.12	10	16	29.38	7 11/32	4 7/8	1.415	0.449	6 5/8
			89.400	620.000	0.330	5.965	6.526	9.786	19.572	8,281	5,321	XT65	8	5	135,300	1.543.700	81.200	Categoría: 1.51	10	15	29.18	7 11/32	4 7/8	1.416	0.446	6 5/8
6 5/8	25.20	Z-140 IEU	131.700	913.700	0.330	5.965	6.526	9.786	19.572	12,204	6,121	FH	8 1/2	4 1/4	109,200	2.102,300	56.100	0,83	10	13	32.36	7 31/32	4 1/8	1.394	0.495	6 5/8
			131.700	913.700	0.330	5.965	6.526	9.786	19.572	12,204	6,121	HT65	8	5	99,700	1.448.400	59.800	0,76	10	16	29.38	7 11/16	4 7/8	1.415	0.449	6 5/8
			131.700	913.700	0.330	5.965	6.526	9.786	19.572	12,204	6,121	XT65	8	5	135,300	1.543.700	81.200	1.03	10	15	29.18	7 11/32	4 7/8	1.416	0.446	6 5/8
			131.700	913.700	0.330	5.965	6.526	9.786	19.572	12,204	6,121	GPDS65	8 1/4	4 7/8	108,200	1.596.400	64.900	0,82	10	13	29.91	7 21/32	4 3/4	1.413	0.458	6 5/8
6 5/8	27.70	E-75 IEU	76.300	534.200	0.362	5.901	7.123	10.578	21.156	7,172	5,894	FH	8	5	73,700	1.448.400	38.400	0.97	10	13	30,61	7 1/2	4 7/8	1.389	0.468	6 5/8
			76.300	534.200	0.362	5.901	7.123	10.578	21.156	7,172	5,894	HT65	8	5	99,700	1.448.400	59.800	1.31	10	16	31.19	7 11/32	4 7/8	1.386	0.477	6 5/8
			76.300	534.200	0.362	5.901	7.123	10.578	21.156	7,172	5,894	XT65	8	5	135,300	1.543.700	81.200	1.77	10	15	31.00	7 11/32	4 7/8	1.387	0.474	6 5/8
6 5/8	27.70	G-105 IEU	106.800	747.900	0.362	5.901	7.123	10.578	21.156	10,040	7,103	FH	8 1/4	4 3/4	86,200	1.678.100	44.600	0,81	10	13	32.07	7 3/4	4 5/8	1.381	0.491	6 5/8
			106.800	747.900	0.362	5.901	7.123	10.578	21.156	10,040	7,103	HT65	8	5	99,700	1.448.400	59.800	0.93	10	16	31.19	7 15/32	4 7/8	1.386	0.477	6 5/8
			106.800	747.900	0.362	5.901	7.123	10.578	21.156	10,040	7,103	XT65	8	5	135,300	1.543.700	81.200	1.27	10	15	31.00	7 11/32	4 7/8	1.387	0.474	6 5/8
6 5/8	27.70	S-135 IEU	137.300	961,600	0.362	5.901	7.123	10.578	21.156	12,909	7,813	FH	8 1/2	4 1/4	109,200	2.102,300	56.100	0,80	10	13	34.18	8	4 1/8	1.365	0.523	6 5/8
			137.300	961,600	0.362	5.901	7.123	10.578	21.156	12,909	7,813	HT65	8	5	99,700	1.448.400	59.800	0,73	10	16	31.19	7 23/32	4 7/8	1.386	0.477	6 5/8
			137.300	961,600	0.362	5.901	7.123	10.578	21.156	12,909	7,813	XT65	8	5	135,300	1.543.700	81.200	0.99	10	15	31.00	7 11/32	4 7/8	1.387	0.474	6 5/8
			137.300	961,600	0.362	5.901	7.123	10.578	21.156	12,909	7,813	GPDS65	8	4 7/8	107,500	1.596.400	64.500	0,78	10	13	30.96	7 23/32	4 3/4	1.385	0.474	6 5/8
6 5/8	27.70	V-150 IEU	152.600	1.068.400	0.362	5.901	7.123	10.578	21.156	14,343	7,970	FH	8 1/2	4 1/4	109,200	2.102,300	56.100	0.72	10	13	34.18	8 1/8	4 1/8	1.365	0.523	6 5/8
			152.600	1.068.400	0.362	5.901	7.123	10.578	21.156	14,343	7,970	HT65	8	5	99,700	1.448.400	59.800	0,65	10	16	31.19	7 27/32	4 7/8	1.386	0.477	6 5/8
			152.600	1.068.400	0.362	5.901	7.123	10.578	21.156	14,343	7,970	XT65	8	5	135,300	1.543.700	81.200	0,89	10	15	31.00	7 7/16	4 7/8	1.387	0.474	6 5/8
			152.600	1.068.400	0.362	5.901	7.123	10.578	21.156	14,343	7,970	GPDS65	8 1/4	4 7/8	108,200	1.596.400	64.900	0,71	10	13	31.74	7 27/32	4 3/4	1.385	0.485	6 5/8
6 5/8	27.70	X-95 IEU	96.600	676.700	0.362	5.901	7.123	10.578	21.156	9,084	6,755	FH	8 1/4	4 3/4	86,200	1.678.100	44.600	0,89	10	13	32.07	7 11/16	4 5/8	1.381	0.491	6 5/8
			96.600	676.700	0.362	5.901	7.123	10.578	21.156	9,084	6,755	HT65	8	5	99,700	1.448.400	59.800	1.03	10	16	31.19	7 3/8	4 7/8	1.386	0.477	6 5/8
			96.600	676.700	0.362	5.901	7.123	10.578	21.156	9,084	6,755	XT65	8	5	135,300	1.543.700	81.200	1.40	10	15	31.00	7 11/32	4 7/8	1.387	0.474	6 5/8
6 5/8	27.70	Z-140 IEU	142.400	997.200	0.362	5.901	7.123	10.578	21.156	13,387	7,881	FH	8 1/2	4 1/4	109,200	2.102,300	56.100	0.77	10	13	34.18	8 1/32	4 1/8	1.365	0.523	6 5/8
			142.400	997.200	0.362	5.901	7.123	10.578	21.156	13,387	7,881	HT65	8	5	99,700	1.448.400	59.800	0,70	10	16	31.19	7 3/4	4 7/8	1.386	0.477	6 5/8
			142.400	997.200	0.362	5.901	7.123	10.578	21.156	13,387	7,881	XT65	8	5	135,300	1.543.700	81.200	0,95	10	15	31.00	7 11/32	4 7/8	1.387	0.474	6 5/8
			142.400	997.200	0.362	5.901	7.123	10.578	21.156	13,387	7,881	GPDS65	8 1/4	4 7/8	108,200	1.596.400	64.900	0,76	10	13	31.74	7 3/4	4 3/4	1.385	0.485	6 5/8

.

SIGUENOS EN  INSTAGRAM : @PERFOBLOGGER